Automatic generation control

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In an electric power system, automatic generation control (AGC) is a system for adjusting the power output of multiple generators at different power plants, in response to changes in the load. Since a power grid requires that generation and load closely balance moment by moment, frequent adjustments to the output of generators are necessary. The balance can be judged by measuring the system frequency; if it is increasing, more power is being generated than used, which causes all the machines in the system to accelerate. If the system frequency is decreasing, more load is on the system than the instantaneous generation can provide, which causes all generators to slow down.

In an electric power system, automatic generation control (AGC) is a system for adjusting the power output of multiple generators at different power plants, in response to changes in the load. Since a power grid requires that generation and load closely balance moment by moment, frequent adjustments to the output of generators are necessary. The balance can be judged by measuring the system frequency; if it is increasing, more power is being generated than used, which causes all the machines in the system to accelerate. If the system frequency is decreasing, more load is on the system than the instantaneous generation can provide, which causes all generators to slow down. \Delta p_m = \Delta p_{ref} - 1/R\times\Delta f where, \Delta p_m is the change in turbine mechanical power output \Delta p_{ref} is the change in a reference power setting R = -\Delta f/\Delta p_m = -slope is the regulation constant which quantifies the sensitivity of the generator to a change in frequency \Delta f is the change in frequency. For steam turbines, steam turbine governing adjusts the mechanical output of the turbine by increasing or decreasing the amount of steam entering the turbine via a throttle valve.

See also

Optimal Power Flow

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1129164895 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001129164895 · captured 1671831054.0 · version history

Cite this page as: encyclopegia.org, “Automatic generation control”, snapshot enwiki-001129164895. https://encyclopegia.org/a/automatic-generation-control

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.