Lesson plan

Average rectified value

In electrical engineering, the average rectified value (ARV) of a quantity is the average of its absolute value. The ARV of an alternating current indicates which direct current would transport the same amount of electrical charge within the same period of time. On the other hand the RMS describes which direct current delivers the same amount of power within the same time period. The average of a symmetric alternating value is zero and it is therefore not useful to characterize it. Thus the easiest way to determine a quantitative measurement size is to use the average rectified value. The average rectified value is mainly used to characterize alternating voltage and current. It can be computed by averaging the absolute value of a waveform over one full period of the waveform. While conceptually similar to the root mean square (RMS), ARV will differ from it whenever a function's absolute value varies locally, as the former then increases disproportionately. The difference is expressed by the form factor : k_{\mathrm{f}} = {\mathrm{RMS}\over\mathrm{ARV}}.

Back to article

Article summary

In electrical engineering, the average rectified value (ARV) of a quantity is the average of its absolute value. The ARV of an alternating current indicates which direct current would transport the same amount of electrical charge within the same period of time. On the other hand the RMS describes which direct current delivers the same amount of power within the same time period. The average of a symmetric alternating value is zero and it is therefore not useful to characterize it. Thus the easiest way to determine a quantitative measurement size is to use the average rectified value. The average rectified value is mainly used to characterize alternating voltage and current. It can be computed by averaging the absolute value of a waveform over one full period of the waveform. While conceptually similar to the root mean square (RMS), ARV will differ from it whenever a function's absolute value varies locally, as the former then increases disproportionately. The difference is expressed by the form factor : k_{\mathrm{f}} = {\mathrm{RMS}\over\mathrm{ARV}}.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.