Lesson plan
AVT Statistical filtering algorithm
AVT Statistical filtering algorithm is an approach to improving quality of raw data collected from various sources. It is most effective in cases when there is inband noise present. In those cases AVT is better at filtering data then, band-pass filter or any digital filtering based on variation of. Conventional filtering is useful when signal/data has different frequency than noise and signal/data is separated/filtered by frequency discrimination of noise. Frequency discrimination filtering is done using Low Pass, High Pass and Band Pass filtering which refers to relative frequency filtering criteria target for such configuration. Those filters are created using passive and active components and sometimes are implemented using software algorithms based on Fast Fourier transform (FFT). AVT filtering is implemented in software and its inner working is based on statistical analysis of raw data. When signal frequency/(useful data distribution frequency) coincides with noise frequency/(noisy data distribution frequency) we have inband noise. In this situations frequency discrimination filtering does not work since the noise and useful signal are indistinguishable and where AVT excels. To achieve filtering in such conditions there are several methods/algorithms available which are briefly described below.
Article summary
AVT Statistical filtering algorithm is an approach to improving quality of raw data collected from various sources. It is most effective in cases when there is inband noise present. In those cases AVT is better at filtering data then, band-pass filter or any digital filtering based on variation of. Conventional filtering is useful when signal/data has different frequency than noise and signal/data is separated/filtered by frequency discrimination of noise. Frequency discrimination filtering is done using Low Pass, High Pass and Band Pass filtering which refers to relative frequency filtering criteria target for such configuration. Those filters are created using passive and active components and sometimes are implemented using software algorithms based on Fast Fourier transform (FFT). AVT filtering is implemented in software and its inner working is based on statistical analysis of raw data. When signal frequency/(useful data distribution frequency) coincides with noise frequency/(noisy data distribution frequency) we have inband noise. In this situations frequency discrimination filtering does not work since the noise and useful signal are indistinguishable and where AVT excels. To achieve filtering in such conditions there are several methods/algorithms available which are briefly described below.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.