Back-up ring
≈ 2 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A back-up ring is a rigid ring that holds an elastomeric seal or plastic (such as Polyethylene) connection to its designed shape and in its correct place. Back up rings are commonly used with O-rings, lip seals, and as reciprocating shaft seals. They are also used for piping connections joining two different materials - typically one flexible and one rigid.
A back-up ring is a rigid ring that holds an elastomeric seal or plastic (such as Polyethylene) connection to its designed shape and in its correct place. Back up rings are commonly used with O-rings, lip seals, and as reciprocating shaft seals. They are also used for piping connections joining two different materials - typically one flexible and one rigid.
Rubber Contoured Back-Up Ring Size Chart
Contoured back-ups are routinely produced in a 90 durometer nitrile. This provides sufficient elasticity to permit stretching over the major diameter of a piston and then snapping back into the gland groove cut into the piston. 90 durometer has sufficient hardness to resist extrusion of the softer elastomeric O-ring performing the actual sealing function against the high pressure liquid or gas. 000 Series O-rings 0.070" ±0.003" - .045" Thick 100 Series O-rings 0.103" ±0.003" - .045" Thick 200 Series O-rings 0.139" ±0.004" - .040" Thick 300 Series O-rings 0.210" ±0.005" - .060" Thick 400 Series O-rings 0.275" ±0.006" - .096" Thick
References
External links
[http://www.theoringstore.com/index.php?main_page=page&id=18 "Rubber Contoured Back-Up Ring Size Chart" Technical Note PP 811-TN PE Flange Connections
Text derived from https://en.wikipedia.org/w/index.php?oldid=919985833 under CC BY-SA 4.0; modifications have been made.