Lesson plan
Basic dimension
In a technical drawing, a basic dimension is a theoretically exact dimension, given from a datum to a feature of interest. In Geometric dimensioning and tolerancing, basic dimensions are defined as a numerical value used to describe the theoretically exact size, profile, orientation or location of a feature or datum target. Allowable variations from the theoretically exact geometry are indicated by feature control, notes, and tolerances on other non-basic dimensions. Basic dimensions are currently denoted by enclosing the number of the dimension in a rectangle. In earlier times, they were denoted by appending "BASIC" or "BSC" to the dimension When features are located using BASIC dimensions by chain dimensioning, there is no accumulation of tolerance between features, because the dimensions refer to the theoretically perfect position of the feature, not the actual location of the feature within the range permitted by tolerances. Basic dimensions, identified by the engineer, locate tolerance zones. Because that’s true, basic dimensions identify tolerance information located in feature control frames that state geometric tolerances. When an engineer makes a statement of tolerance, that statement is made in the form of a feature control frame.
Article summary
In a technical drawing, a basic dimension is a theoretically exact dimension, given from a datum to a feature of interest. In Geometric dimensioning and tolerancing, basic dimensions are defined as a numerical value used to describe the theoretically exact size, profile, orientation or location of a feature or datum target. Allowable variations from the theoretically exact geometry are indicated by feature control, notes, and tolerances on other non-basic dimensions. Basic dimensions are currently denoted by enclosing the number of the dimension in a rectangle. In earlier times, they were denoted by appending "BASIC" or "BSC" to the dimension When features are located using BASIC dimensions by chain dimensioning, there is no accumulation of tolerance between features, because the dimensions refer to the theoretically perfect position of the feature, not the actual location of the feature within the range permitted by tolerances. Basic dimensions, identified by the engineer, locate tolerance zones. Because that’s true, basic dimensions identify tolerance information located in feature control frames that state geometric tolerances. When an engineer makes a statement of tolerance, that statement is made in the form of a feature control frame.
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.