Lesson plan

BBÖ 114

The BBÖ 114 was a class of one Austrian three-cylinder 2-8-4 express train steam locomotive. At the same time as plans were developed for the two-cylinder 214 series, design emerged in the Wiener Neustädter Lokomotivfabrik for a three-cylinder engine. In order to be able to compare the two designs it was decided to build a prototype of each one. Number 114.01 was built in the Wiener Neustädter Lokomotivfabrik and delivered in 1929. In general the advantage of three-cylinder locomotives lies in their more powerful torque and a better balance of the rotating masses, which leads to lower wear and tear. The disadvantage is a higher fuel consumption due to the three steam engines. This was true in the case of 114.01 which in comparison with locomotive 214.01 had a 9% higher consumption of coal. Difficult access to the inside gear and the associated poor maintainability of locomotive 114.01, combined with the fact that 214.01 did better in the trial runs, led to the 214s going into series production. Number 114.01 remained in service with the BBÖ as a one-off. A visible difference from the 214s is the visible parts of the unusual Marshall valve gear with its rotating camshaft. In 1938 the Deutsche Reichsbahn redesignated this locomotive as number 12 101.…

Back to article

Article summary

The BBÖ 114 was a class of one Austrian three-cylinder 2-8-4 express train steam locomotive. At the same time as plans were developed for the two-cylinder 214 series, design emerged in the Wiener Neustädter Lokomotivfabrik for a three-cylinder engine. In order to be able to compare the two designs it was decided to build a prototype of each one. Number 114.01 was built in the Wiener Neustädter Lokomotivfabrik and delivered in 1929. In general the advantage of three-cylinder locomotives lies in their more powerful torque and a better balance of the rotating masses, which leads to lower wear and tear. The disadvantage is a higher fuel consumption due to the three steam engines. This was true in the case of 114.01 which in comparison with locomotive 214.01 had a 9% higher consumption of coal. Difficult access to the inside gear and the associated poor maintainability of locomotive 114.01, combined with the fact that 214.01 did better in the trial runs, led to the 214s going into series production. Number 114.01 remained in service with the BBÖ as a one-off. A visible difference from the 214s is the visible parts of the unusual Marshall valve gear with its rotating camshaft. In 1938 the Deutsche Reichsbahn redesignated this locomotive as number 12 101.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.