Lesson plan

Beam parameter product

In laser science, the beam parameter product (BPP) is the product of a laser beam's divergence angle (half-angle) and the radius of the beam at its narrowest point (the beam waist). The BPP quantifies the quality of a laser beam, and how well it can be focused to a small spot. A Gaussian beam has the lowest possible BPP, \lambda/\pi , where \lambda is the wavelength of the light. The ratio of the BPP of an actual beam to that of an ideal Gaussian beam at the same wavelength is denoted M 2 ("M squared"). This parameter is a wavelength-independent measure of beam quality. The general wave equation, assuming paraxial approximation, yields: : \mathrm{BPP} = \varphi \cdot w_0 = M^2 \cdot \frac{\lambda}{\pi} . With: : \varphi the half angle in far field : w_0 the beam waist : M^2 the beam quality factor, M squared : \lambda the wavelength. The quality of a beam is important for many applications. In fiber-optic communications beams with an M 2 close to 1 are required for coupling to single-mode optical fiber. Laser machine shops care a lot about the M 2 parameter of their lasers because the beams will focus to an area that is M 4 times larger than that of a Gaussian beam with the same wavelength and D4σ waist width; in other words, the fluence scales as 1/M 4 . The rule of thumb is that M 2 increases as the laser power increases.…

Back to article

Article summary

In laser science, the beam parameter product (BPP) is the product of a laser beam's divergence angle (half-angle) and the radius of the beam at its narrowest point (the beam waist). The BPP quantifies the quality of a laser beam, and how well it can be focused to a small spot. A Gaussian beam has the lowest possible BPP, \lambda/\pi , where \lambda is the wavelength of the light. The ratio of the BPP of an actual beam to that of an ideal Gaussian beam at the same wavelength is denoted M 2 ("M squared"). This parameter is a wavelength-independent measure of beam quality. The general wave equation, assuming paraxial approximation, yields: : \mathrm{BPP} = \varphi \cdot w_0 = M^2 \cdot \frac{\lambda}{\pi} . With: : \varphi the half angle in far field : w_0 the beam waist : M^2 the beam quality factor, M squared : \lambda the wavelength. The quality of a beam is important for many applications. In fiber-optic communications beams with an M 2 close to 1 are required for coupling to single-mode optical fiber. Laser machine shops care a lot about the M 2 parameter of their lasers because the beams will focus to an area that is M 4 times larger than that of a Gaussian beam with the same wavelength and D4σ waist width; in other words, the fluence scales as 1/M 4 . The rule of thumb is that M 2 increases as the laser power increases.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.