Beardmore Cyclone

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Beardmore Cyclone was an aero engine produced by William Beardmore & Co with the aim of producing an engine generating a high power output at low revolutions by designing an engine of large displacement. The design did not enter volume production.

The Beardmore Cyclone was an aero engine produced by William Beardmore & Co with the aim of producing an engine generating a high power output at low revolutions by designing an engine of large displacement. The design did not enter volume production.

Design and development

The Cyclone was an upright inline six-cylinder water-cooled engine with a bore of and stroke of stroke, giving a displacement of . It had a combined crankcase and cylinder block made of aluminium with steel cylinder liners and aluminium pistons. Each cylinder had its own detachable head, with two spark plugs and four valves operated by push-rods driven by a single camshaft. The compression ratio was 5.25 to 1. The Cyclone was first run in 1922, producing 700 hp (522  kW) at 1,220 rpm. Further development increased output to 850 hp (634 kW) at 1,350 rpm but could produce 950 hp (708 kW) at the same rpm with a larger carburettor.

Variants

The Beardmore Typhoon was an inverted version of the Cyclone, with almost all parts being interchangeable between the two engines. It was test flown in Avro Aldershot J6852 in January 1927. A compression ignition version of the Typhoon was projected and was the original choice of power-plant for the R101 airship, but this version proved impractical.

Specifications

See also

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1351846172 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.