Bearing modulus

Uses your system voice; voice and rate in settings.

Snapshot

≈ 1 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Bearing modulus is a modulus used in journal bearing design. It is a dimensionless number.

Bearing modulus is a modulus used in journal bearing design. It is a dimensionless number.

Formula

Bearing Modulus (C) is C = (Zn/p) where Z = oil viscosity n = speed of rotation (rpm) p = bearing pressure(N/MM2) For any given bearing, there is a value for indicated by C, for which the coefficient of friction is at a minimum. The bearing should not be operated at this value of bearing modulus, since a slight decrease in speed or a slight increase in pressure will make the part of a shaft or axle that rests on bearings operate in partial lubrication state resulting in high friction, heating and wear. To prevent this, the average value of Bearing modulus should be Zn/p >= 3C or for large fluctuations and heavy impact loads Zn/p = 15C (approx)

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1217864507 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001217864507 · captured 1712562253.0 · version history

Cite this page as: encyclopegia.org, “Bearing modulus”, snapshot enwiki-001217864507. https://encyclopegia.org/a/bearing-modulus

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.