bearing surface

Uses your system voice; voice and rate in settings.

Q4876746Snapshot

≈ 3 min read

Names in other languages

  • Españolsuperficie de apoyo
  • Englishbearing surface
  • Tiếng ViệtBề mặt chịu tải
  • العربيةالسطح الحامل
  • nbbrystning
  • nnbrystning
  • 日本語軸受面
  • 中文承壓面

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

. It is often the underside of a screw head (male seat, marked A) or a flat at the end of the screw thread (female seat, marked B). A bearing surface in mechanical engineering is the area of contact between two objects. It usually is used in reference to bolted joints and bearings, but can be applied to a wide variety of engineering applications. The choice of bearing surface depends on the application, load, speed, and operating conditions, and the design must be able to withstand high loads, resist wear and corrosion, and operate at high speeds.

On a screw, the bearing area loosely refers to the underside of the head. Strictly speaking, the bearing area refers to the area of the screw head that directly bears on the part being fastened. For a cylindrical bearing, it is the projected area perpendicular to the applied force. On a spring, the bearing area refers to the amount of area on the top or bottom surface of the spring in contact with the constraining part.

The ways of machine tools, such as dovetail slides, box ways, prismatic ways, and other types of machine slides are also bearing surfaces.

. It is often the underside of a screw head (male seat, marked A) or a flat at the end of the screw thread (female seat, marked B). A bearing surface in mechanical engineering is the area of contact between two objects. It usually is used in reference to bolted joints and bearings, but can be applied to a wide variety of engineering applications. The choice of bearing surface depends on the application, load, speed, and operating conditions, and the design must be able to withstand high loads, resist wear and corrosion, and operate at high speeds.

On a screw, the bearing area loosely refers to the underside of the head. Strictly speaking, the bearing area refers to the area of the screw head that directly bears on the part being fastened. For a cylindrical bearing, it is the projected area perpendicular to the applied force. On a spring, the bearing area refers to the amount of area on the top or bottom surface of the spring in contact with the constraining part.

The ways of machine tools, such as dovetail slides, box ways, prismatic ways, and other types of machine slides are also bearing surfaces.

See also

Babbitt, an alloy that covers a bearing surface Bridge bearing Pillow block bearing Plain bearing

References

Bibliography

. .

Text derived from https://en.wikipedia.org/w/index.php?oldid=1351470292 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot bearing-surface-556632-8d728f0379a83e99 · hash 8d728f0379a83e99cf0d5ccb370b39d6cb206c0926e6eeeceeee375f946c3c9a · captured 1777342339.0 · version history

Cite this page as: encyclopegia.org, “bearing surface”, snapshot bearing-surface-556632-8d728f0379a83e99. https://encyclopegia.org/a/bearing-surface

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.