Bede Wing

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Bede Wing was an inflated hang glider, designed in the 1970s by aeronautical engineer Jim Bede. Intended as a safer alternative to conventional hang gliders, it resembled an early ram-air parachute, but instead was an inflatable structure, that could be filled with air for gliding, or with helium to act as a gas balloon. The aspect ratio of the Bede Wing was low, in the area of 1.8. Fitted with unusually long suspension lines, the Bede Wing had almost no dihedral. It was also reported to have a lower sink rate than conventional hang gliders of the time. Although Bede intended to start full production of the Bede Wing, the project came to nothing. However, it foreshadowed the introduction of ram-air inflated paragliders in the mid-1980s.

The Bede Wing was an inflated hang glider, designed in the 1970s by aeronautical engineer Jim Bede. Intended as a safer alternative to conventional hang gliders, it resembled an early ram-air parachute, but instead was an inflatable structure, that could be filled with air for gliding, or with helium to act as a gas balloon. The aspect ratio of the Bede Wing was low, in the area of 1.8. Fitted with unusually long suspension lines, the Bede Wing had almost no dihedral. It was also reported to have a lower sink rate than conventional hang gliders of the time. Although Bede intended to start full production of the Bede Wing, the project came to nothing. However, it foreshadowed the introduction of ram-air inflated paragliders in the mid-1980s.

See also

References

External links

Bede wing in flight

Text derived from https://en.wikipedia.org/w/index.php?oldid=1321128882 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

2 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.