bell
≈ 12 min read
Names in other languages
- euezkila
- Polskidzwon
- Englishbell
- 中文铃
- 简体中文铃
- 繁體中文鐘
- 中文鈴
- 中文铃
- 中文鈴
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A bell ( ) is a directly struck idiophone percussion instrument. Most bells have the shape of a hollow cup that—when struck—vibrates in a single strong strike tone, with its sides forming an efficient resonator. The strike may be made by an internal "clapper" or "uvula", an external hammer, or—in small bells—by a small loose sphere enclosed within the body of the bell (jingle bell). Bells are usually cast from bell metal (a type of bronze) for its resonant properties, but can also be made from other hard materials. This depends on the function. Some small bells (such as ornamental bells or cowbells) can be made from cast or pressed metal, glass or ceramic, but large bells (such as a church, clock, and tower bells) are normally cast from bell metal. Bells intended to be heard over a wide area can range from a single bell hung in a turret or bell-gable, to a musical ensemble such as an English ring of bells, a carillon or a Russian zvon which are tuned to a common scale and installed in a bell tower. Many public or institutional buildings house bells, most commonly as clock bells to sound the hours and quarters. Historically, bells have been associated with religious rites, and are still used to call communities together for religious services. Later, bells were made to commemorate important events or people and have been associated with the concepts of peace and freedom.…
A bell ( ) is a directly struck idiophone percussion instrument. Most bells have the shape of a hollow cup that—when struck—vibrates in a single strong strike tone, with its sides forming an efficient resonator. The strike may be made by an internal "clapper" or "uvula", an external hammer, or—in small bells—by a small loose sphere enclosed within the body of the bell (jingle bell). Bells are usually cast from bell metal (a type of bronze) for its resonant properties, but can also be made from other hard materials. This depends on the function. Some small bells (such as ornamental bells or cowbells) can be made from cast or pressed metal, glass or ceramic, but large bells (such as a church, clock, and tower bells) are normally cast from bell metal. Bells intended to be heard over a wide area can range from a single bell hung in a turret or bell-gable, to a musical ensemble such as an English ring of bells, a carillon or a Russian zvon which are tuned to a common scale and installed in a bell tower. Many public or institutional buildings house bells, most commonly as clock bells to sound the hours and quarters. Historically, bells have been associated with religious rites, and are still used to call communities together for religious services. Later, bells were made to commemorate important events or people and have been associated with the concepts of peace and freedom. The study of bells is called campanology.
Etymology
Bell is a word common to the Low German dialects, cognate with Middle Low German and Dutch but not appearing among the other Germanic languages except the Icelandic which was a loanword from Old English. It is popularly but not certainly related to the former sense of to bell ( , 'to roar, to make a loud noise') which gave rise to bellow.
Casting
Small bells were originally made with the lost wax process but large bells are cast mouth downwards by filling the air space in a two-part mould with molten metal. Such a mould has an outer section clamped to a base-plate on which an inner core has been constructed. The core is built on the base-plate using porous materials such as coke or brick, and then covered in loam (well mixed with straw and horse manure). This is given a profile corresponding to the inside shape of the finished bell and dried with gentle heat. Graphite and whiting are applied to form the final, smooth surface. The outside of the mould is made within a perforated cast-iron case, larger than the finished bell, containing the loam mixture which is shaped, dried and smoothed in the same way as the core. The case is inverted (mouth down), lowered over the core and clamped to the base plate. The clamped mould is supported, usually by being buried in a casting pit to bear the weight of metal and to allow even cooling. Historically, before rail or road transport of large bells was possible, a "bell pit" was often dug in the grounds of the building where the bell was to be installed. Molten bell metal is poured into the mould through a box lined with foundry sand. The founder would bring his casting tools to the site, and a furnace would be built next to the pit.
Bell tuning
(1497) typical of a harmonically-tuned bell: strike note is E, with hum note an octave below, minor third, fifth, nominal above, and major third and perfect fifth in the second octave Large bells are generally around 80% copper and 20% tin (bell metal), which has been found empirically to give the most pleasant tone. However, the tone of a bell is mostly due to its shape. A bell is regarded as having a good tone when it is "in tune with itself". In western bell founding, this is known as "harmonic tuning" of a bell, which results in the bell's strongest harmonics being in harmony with each other and the strike note. This produces the brightest and purest sound, which is the attractive sound of a good bell. Much effort has been expended over the centuries to find the shape which will produce a harmonically tuned bell. The accompanying musical staves show the series of harmonics which are generated when a bell is struck. The Erfurt bell is notable in that, although old, it is harmonically tuned—something atypical of its era. In the 17th century, Pieter and François Hemony cast many carillon bells of unequalled tuning quality. After their death, however, their guarded trade secrets were lost, and bells of comparable quality were not cast again until the 19th century. It was only in modern times that repeatable harmonic tuning using a known scientific basis was achieved. The main partials (or harmonics) of a well-tuned bell are: hum note (an octave below the named note) strike tone (also called tap note or named note) tierce (a minor third above named note) quint (a fifth above named note) nominal (an octave above named note) Further, less-audible, harmonics include the major third and a perfect fifth in the second octave above the named note. Over centuries of experimentation, founders have developed an optimum profile for casting each size of a bell to give true harmonic tuning. Although bells are cast to accurate patterns, variations in casting mean that a final tuning is necessary as the shape of the bell is critical in producing the desired strike note and associated harmonics. Tuning is undertaken by clamping the bell on a large rotating table and using a cutting tool to remove metal. This is an iterative process in which metal is removed from certain parts of the bell to change certain harmonics. Historically, this process was made possible by the use of tuning forks to find sympathetic resonance on specific parts of a bell for the harmonic being tuned, but today electronic strobe tuners are normally used. To tune the strike note, the nominal or the strike note are tuned; the effect is usually the same because the nominal is one of the main partials that determines the tone of the strike note. The thickness of a church bell at its thickest part, called the "sound bow", is usually one thirteenth its diameter. If the bell is mounted as cast, it is called a "maiden bell".
Major third bell
The traditional harmonically tuned bell has a minor third as a main harmonic. On the theory that western music in major keys may sound better on bells with a major third as a harmonic, production of bells with major thirds was attempted in the 1980s. Scientists at the Technical University in Eindhoven, using computer modelling, produced bell profiles which were cast by the Eijsbouts Bellfoundry in the Netherlands. They were described as resembling old Coke bottles in that they had a bulge around the middle; In 1999 a design without the bulge was announced. However, the major bell concept has found little favour; most bells cast today are almost universally minor third bells.
Konguro'o
Konguro'o is a small bell which, like the Djalaajyn, was first used for utilitarian purposes and only later for artistic ones. Konguro'o rang when moving to new places. They were fastened to the horse harnesses and created a very specific "smart" sound background. Konguro'o also hung on the neck of the leader goat, which the sheep herd followed. This led to the association in folk memory between the distinctive sound of konguro'o and the nomadic way of life. To make this instrument, Kyrgyz foremen used copper, bronze, iron and brass. They also decorated it with artistic carving and covered it with silver. Sizes of the instruments might vary within certain limits, which depended on its function. Every bell had its own timbre.
Chimes
A variant on the bell is the tubular bell. Several of these metal tubes which are struck manually with hammers, form an instrument named tubular bells or chimes. In the case of wind or aeolian chimes, the tubes are blown against one another by the wind.
Skrabalai
The skrabalai is a traditional folk instrument in Lithuania which consists of wooden bells of various sizes hanging in several vertical rows, with one or two small wooden or metal clappers hanging inside them. It is played with two wooden sticks. When the skrabalai is moved, a clapper knocks at the wall of the trough. The pitch of the sound depends on the size of the wooden trough. The instrument developed from wooden cowbells that shepherds would tie to cows' necks.
Dead bell
In Scotland, up until the nineteenth century, it was the tradition to ring a dead bell, a form of handbell, at the death of an individual and at the funeral.
Bell study and ringing organizations
Numerous organizations promote the ringing, study, music, collection, preservation and restoration of bells, including: The American Bell Association International (United States with foreign chapters) Central Council of Church Bell Ringers (worldwide) – promotes English style full circle change ringing The Guild of Carillonneurs in North America (Canada, Mexico, United States)
References
Notes
Citations
Sources
Further reading
Fadul, Jose A. Fadul's Encyclopedia of Bells. 2015. Lulu Press. Murdoch, James. (1903). A History of Japan. London: Paul, Trench, Trubner. [re-issued by Routledge, London, 1996. Ponsonby-Fane, Richard A. B. (1956). Kyoto: The Old Capital of Japan, 794–1869. Kyoto: The Ponsonby Memorial Society. Spencer, Ann "And round me rings": bell tales and folklore. Toronto: Tundra, 2003 Willis, Stephen Charles. Bells through the Ages: from the Percival Price Collection = Les Cloches à travers les siècles: provenant du fonds Percival Price. Ottawa: National Library of Canada, 1986. 34 p., ill. with b&w photos. N.B.: Prepared on the occasion of an exhibition of the same title, based on the collection of bell and carillon related material and documentation, of former Dominion Carillonneur (of Canadian Parliament, Ottawa), Percival Price, held at the National Library of Canada (as then named), 12 May to 14 Sept. 1986; some copies come with the guide to the taped dubbings of the recordings played as background music to the displays, as technically prepared by Gilles Saint-Laurent and listed by Stephen Charles Willis, both of the library's Music Division; English and French texts respectively divided into upper and lower portions of each page. Bell recordings of the Basque Country 'Bells in Aragón: a traditional means of communication' thesis (Spanish) Animation of English Full-circle ringing Videos of the London Olympic bell being cast, tuned and installed.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1378305102 under CC BY-SA 4.0; modifications have been made.