Bellcrank

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A bellcrank is a type of crank that changes motion through an angle. The angle can range from 0 to 360 degrees, but 90-degree and 180-degree bellcranks are most common. The name comes from its first use, changing the vertical pull on a rope to a horizontal pull on the striker of a bell to sound it.

A bellcrank is a type of crank that changes motion through an angle. The angle can range from 0 to 360 degrees, but 90-degree and 180-degree bellcranks are most common. The name comes from its first use, changing the vertical pull on a rope to a horizontal pull on the striker of a bell to sound it.

Design

A typical 90-degree bellcrank consists of an L-shaped crank pivoted where the two arms of the L meet. Moving rods or cables are attached to the outer ends of the L. When one is pulled, the L rotates around the pivot point, pulling on the other rod. A typical 180-degree bellcrank consists of a straight bar that pivots at or near its center. When one rod is pulled or pushed, the bar rotates around the pivot point, pulling or pushing on the other rod. Changing the length of the bellcrank's arms changes the mechanical advantage of the system. Many applications do not change the direction of motion but instead amplify a force "in line", which a bellcrank can do in a limited space. There is a tradeoff between range of motion, linearity of motion, and size. The greater the angle traversed by the crank, the more the motion ratio changes, and the more non-linear the motion becomes.

Applications

Aircraft

Bellcranks are often used in aircraft flight control systems to connect the pilot's controls to the control surfaces. For example, on light aircraft, the rudder often has a bellcrank (also called a control horn) whose pivot point is the rudder hinge. A cable connects one of the pilot's rudder pedals to one side of the bellcrank. When the pilot pushes the rudder pedal, the cable pulls the bellcrank, causing the rudder to rotate. The opposite rudder pedal is connected to the other end of the bellcrank to rotate the rudder in the opposite direction. Bellcranks are also used with model aircraft to transmit forces between control cables and flight surfaces.

References

External links

Mechanisms – Bellcrank, Design Aerospace LLC (archived)

Text derived from https://en.wikipedia.org/w/index.php?oldid=1358658095 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.