Belleville washer

A Belleville washer, also known as a coned-disc spring, conical spring washer, disc spring, Belleville spring or cupped spring washer, is a type of spring shaped like a washer.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

  • EnglishBelleville washer
  • DeutschSpannscheibe

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A Belleville washer, also known as a coned-disc spring, conical spring washer, disc spring, Belleville spring or cupped spring washer, is a type of spring shaped like a washer. Its shape, a cone frustum, that gives the washer its characteristic spring.

The "Belleville" name comes from the inventor Julien Belleville who in Dunkirk, France, in 1867 patented a spring design which already contained the principle of the disc spring. The real inventor of Belleville washers is unknown. Through the years, many profiles for disc springs have been developed.

Works

Today the most used are the profiles with or without contact flats, while some other profiles, like disc springs with trapezoidal cross-section, have lost importance. \delta=\frac{D_e}{D_i} {C_1}=\frac{\left(\frac{t'}{t}\right)^2}{\left(\frac{1}{4}\cdot\frac{l}{t}-\frac{t'}{t}+\frac{3}{4}\right)\cdot{\left(\frac{5}{8}\cdot\frac{l}{t}-\frac{t'}{t}+\frac{3}{8}\right)} } {C_2}=\frac{C_1}{\left(\frac{t'}{t}\right)^3}\cdot\left[\frac{5}{32}\cdot\left(\frac{l}{t}-1\right)^2+1\right] {K_4}=\sqrt{-\frac{C_1}{2}+\sqrt{\left(\frac{C_1}{2}\right)^2+C_2}} The equation to calculate the load to apply to a single disc spring in order to obtain a deflection {s} is: F=\frac{4E}{1-\mu^2}\cdot\frac{t^4}{K_1*{D_e}^2}\cdot{K_4}^2\cdot\frac{s}{t}\cdot\left [{K_4}^2\cdot\left(\frac{h_0}{t}-\frac{s}{t}\right)\cdot\left(\frac{h_0}{t}-\frac{s}{2t}\right)+1\right] Note that for disc springs with constant thickness, {t'} is equal to {t} and consequently {K_4} is 1. For what concerns disc springs with contact flats and reduced thickness it has to be said that a paper published in July 20131, demonstrated that the {K_4} equation as defined inside the standard norms is not correct as it would result in every reduced thickness being considered right and this is, of course, impossible.

As written in that paper {K_4} should be replaced with a new coefficient, {R_d} , which depends not only from the \frac{t'}{t} ratio but also from the flank angles of the spring. The spring constant (or spring rate) is defined as: {k}=\frac{dF}{ds} If friction and bottoming-out effects are ignored, the spring rate of a stack of identical Belleville washers can be quickly approximated.

Counting from one end of the stack, group by the number of adjacent washers in parallel. For example, in the stack of washers to the right, the grouping is 2-3-1-2, because there is a group of 2 washers in parallel, then a group of 3, then a single washer, then another group of 2.

The total spring coefficient is: K = \frac{k}{\sum_{i=1}^g \frac{1}{n_i}} K = \frac{k}{\frac{1}{2}+\frac{1}{3}+\frac{1}{1}+\frac{1}{2}} K = \frac{3}{7} \cdot{k} Where n_i = the number of washers in the ith group {g} = the number of groups {k} = the spring constant of one washer So, a 2-3-1-2 stack (or, since addition is commutative, a 3-2-2-1 stack) gives a spring constant of 3/7 that of a single washer. These same 8 washers can be arranged in a 3-3-2 configuration ( K = \frac{6}{7}\cdot k ), a 4-4 configuration ( K = 2\cdot k ), a 2-2-2-2 configuration ( K = \frac{1}{2}\cdot k ), and various other configurations.

The number of unique ways to stack {n} washers is defined by the integer partition function p(n) and increases rapidly with large {n} , allowing fine-tuning of the spring constant. However, each configuration will have a different length, requiring the use of shims in most cases.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370726650 under CC BY-SA 4.0; modifications have been made.

References

  1. ↩Wikipedia “Belleville washer” revision 1370726650 · retrieved 2026-10-20 publication date (×1) · confidence 0.95 revision URL