Lesson plan

Berger code

In telecommunications, a Berger code is a unidirectional error-detecting code. It is named after J. M. Berger, its inventor. Berger codes can detect all unidirectional errors. Unidirectional errors are errors that only flip ones into zeroes or only zeroes into ones, such as in asymmetric channels. The check bits of Berger codes are computed by counting all the zeroes in the information word, and expressing that number in natural binary. If the information word consists of n bits, then the Berger code needs k = \lceil \log_2 (n+1)\rceil "check bits", giving a Berger code of length k+n. (In other words, the k check bits are enough to check up to n = 2^k - 1 information bits). Berger codes can detect any number of one-to-zero bit-flip errors, as long as no zero-to-one errors occurred in the same code word. Similarly, Berger codes can detect any number of zero-to-one bit-flip errors, as long as no one-to-zero bit-flip errors occur in the same code word. Berger codes cannot correct any error. Like all unidirectional error detecting codes, Berger codes can also be used in delay-insensitive circuits.

Back to article

Article summary

In telecommunications, a Berger code is a unidirectional error-detecting code. It is named after J. M. Berger, its inventor. Berger codes can detect all unidirectional errors. Unidirectional errors are errors that only flip ones into zeroes or only zeroes into ones, such as in asymmetric channels. The check bits of Berger codes are computed by counting all the zeroes in the information word, and expressing that number in natural binary. If the information word consists of n bits, then the Berger code needs k = \lceil \log_2 (n+1)\rceil "check bits", giving a Berger code of length k+n. (In other words, the k check bits are enough to check up to n = 2^k - 1 information bits). Berger codes can detect any number of one-to-zero bit-flip errors, as long as no zero-to-one errors occurred in the same code word. Similarly, Berger codes can detect any number of zero-to-one bit-flip errors, as long as no one-to-zero bit-flip errors occur in the same code word. Berger codes cannot correct any error. Like all unidirectional error detecting codes, Berger codes can also be used in delay-insensitive circuits.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.