Bi-elliptic transfer

In astronautics and aerospace engineering, the bi-elliptic transfer is an orbital maneuver that moves a spacecraft from one orbit to another and may, in certain situations, require less delta-v than a Hohmann transfer maneuver.

Uses your system voice; voice and rate in settings.

≈ 6 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In astronautics and aerospace engineering, the bi-elliptic transfer is an orbital maneuver that moves a spacecraft from one orbit to another and may, in certain situations, require less delta-v than a Hohmann transfer maneuver. The bi-elliptic transfer consists of two half-elliptic orbits.

From the initial orbit, a first burn expends delta-v to boost the spacecraft into the first transfer orbit with an apoapsis at some point r_b away from the central body. At this point a second burn sends the spacecraft into the second elliptical orbit with periapsis at the radius of the final desired orbit, where a third burn is performed, injecting the spacecraft into the desired orbit.

While they require one more engine burn than a Hohmann transfer and generally require a greater travel time, some bi-elliptic transfers require a lower amount of total delta-v than a Hohmann transfer when the ratio of final to initial semi-major axis is 11.94 or greater, depending on the intermediate semi-major axis chosen. The idea of the bi-elliptical transfer trajectory was first published by Ary Sternfeld in 19341.

Delta-v

The three required changes in velocity can be obtained directly from the vis-viva equation v^2 = \mu \left( \frac{2}{r} - \frac{1}{a} \right), where v is the speed of an orbiting body, \mu = GM is the standard gravitational parameter of the primary body, r is the distance of the orbiting body from the primary, i.e., the radius, a is the semi-major axis of the body's orbit. In what follows, r_1 is the radius of the initial circular orbit, r_2 is the radius of the final circular orbit, r_b is the common apoapsis radius of the two transfer ellipses and is a free parameter of the maneuver, a_1 and a_2 are the semimajor axes of the two elliptical transfer orbits, which are given by a_1 = \frac{r_1 + r_b}{2}, and a_2 = \frac{r_2 + r_b}{2}.

Starting from the initial circular orbit with radius r_1 (dark blue circle in the figure to the right), a prograde burn (mark 1 in the figure) puts the spacecraft on the first elliptical transfer orbit (aqua half-ellipse). The magnitude of the required delta-v for this burn is \Delta v_1 = \sqrt{ \frac{2 \mu}{r_1} - \frac{\mu}{a_1}} - \sqrt{\frac{\mu}{r_1}}.

When the apoapsis of the first transfer ellipse is reached at a distance r_b from the primary, a second prograde burn (mark 2) raises the periapsis to match the radius of the target circular orbit, putting the spacecraft on a second elliptic trajectory (orange half-ellipse). The magnitude of the required delta-v for the second burn is \Delta v_2 = \sqrt{\frac{2 \mu}{r_b} - \frac{\mu}{a_2}} - \sqrt{\frac{2 \mu}{r_b} - \frac{\mu}{a_1}}.

Lastly, when the final circular orbit with radius r_2 is reached, a retrograde burn (mark 3) circularizes the trajectory into the final target orbit (red circle). The final retrograde burn requires a delta-v of magnitude \Delta v_3 = \sqrt{\frac{2 \mu}{r_2} - \frac{\mu}{a_2}} - \sqrt{\frac{\mu}{r_2}}.

If r_b = r_2 , then the maneuver reduces to a Hohmann transfer (in that case \Delta v_3 can be verified to become zero). Thus the bi-elliptic transfer constitutes a more general class of orbital transfers, of which the Hohmann transfer is a special two-impulse case.

The maximal possible savings can be computed by assuming that r_b = \infty , in which case the total \Delta v simplifies to \sqrt{\mu/r_1} \left(\sqrt{2} - 1\right) \left(1 + \sqrt{r_1/r_2}\right) . In this case, one also speaks of a bi-parabolic transfer because the two transfer trajectories are no longer ellipses but parabolas. The transfer time increases to infinity too.

Transfer time

Like the Hohmann transfer, both transfer orbits used in the bi-elliptic transfer constitute exactly one half of an elliptic orbit. This means that the time required to execute each phase of the transfer is half the orbital period of each transfer ellipse. Using the equation for the orbital period and the notation from above, T = 2 \pi \sqrt{\frac{a^3}{\mu}}.

The total transfer time t is the sum of the times required for each half-orbit. Therefore: t_1 = \pi \sqrt{\frac{a_1^3}{\mu}} \quad \text{and} \quad t_2 = \pi \sqrt{\frac{a_2^3}{\mu}}, and finally: t = t_1 + t_2. t = \pi\sqrt{\frac{a_1^3}{\mu}} + \pi\sqrt{\frac{a_2^3}{\mu}}, is a major drawback for this maneuver. It even becomes infinite for the bi-parabolic transfer limiting case.

The Hohmann transfer takes less than half of the time because there is just one transfer half-ellipse. To be precise, t = \pi\sqrt{\frac{a^3}{\mu}}.

Example

To transfer from a circular low Earth orbit with to a new circular orbit with using a Hohmann transfer orbit requires a Δv of . However, because , it is possible to do better with a bi-elliptic transfer.

If the spaceship first accelerated 3061.04 m/s, thus achieving an elliptic orbit with apogee at , then at apogee accelerated another 608.825 m/s to a new orbit with perigee at , and finally at perigee of this second transfer orbit decelerated by 447.662 m/s, entering the final circular orbit, then the total Δv would be only 4117.53 m/s, which is 16.19 m/s (0.4%) less. The Δv saving could be further improved by increasing the intermediate apogee, at the expense of longer transfer time.

For example, an apogee of (1.3 times the distance to the Moon) would result in a 1% Δv saving over a Hohmann transfer, but require a transit time of 17 days. As an impractical extreme example, an apogee of (30 times the distance to the Moon) would result in a 2% Δv saving over a Hohmann transfer, but the transfer would require 4.5 years (and, in practice, be perturbed by the gravitational effects of other Solar system bodies).

For comparison, the Hohmann transfer requires 15 hours and 34 minutes. Evidently, the bi-elliptic orbit spends more of its delta-v closer to the planet (in the first burn). This yields a higher contribution to the specific orbital energy and, due to the Oberth effect, is responsible for the net reduction in required delta-v.

See also

Delta-v budget Oberth effect

Text derived from https://en.wikipedia.org/w/index.php?oldid=1233203053 under CC BY-SA 4.0; modifications have been made.

Words in each sectionDelta-vDelta-vDelta-v: 473 words473ExampleExampleExample: 261 words261Transfer timeTransfer timeTransfer time: 166 words166See alsoSee alsoSee also: 25 words25
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

References

  1. ↩Wikipedia “Bi-elliptic transfer” revision 1233203053 · retrieved 2026-10-20 publication date (×1) · confidence 0.95 revision URL

Provenance

snapshot enwiki-001233203053 · captured 2024-07-07 · ledger · version history

Cite this page as: encyclopegia.org, “Bi-elliptic transfer”, snapshot enwiki-001233203053. https://encyclopegia.org/a/bi-elliptic-transfer