Bias tee
≈ 4 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
A bias tee is a three-port network used for setting the DC bias point of some electronic components without disturbing other components. The bias tee is a diplexer. The low-frequency port is used to set the bias; the high-frequency port passes the radio-frequency signals but blocks the biasing levels; the combined port connects to the device, which sees both the bias and RF. It is called a tee because the 3 ports are often arranged in the shape of a T.
A bias tee is a three-port network used for setting the DC bias point of some electronic components without disturbing other components. The bias tee is a diplexer. The low-frequency port is used to set the bias; the high-frequency port passes the radio-frequency signals but blocks the biasing levels; the combined port connects to the device, which sees both the bias and RF. It is called a tee because the 3 ports are often arranged in the shape of a T.
Design
Conceptually, the bias tee can be viewed as an ideal capacitor that allows AC through but blocks the DC bias and an ideal inductor that blocks AC but allows DC. Although some bias tees can be made with a simple inductor and capacitor, wideband bias tees are considerably more complicated because practical components have parasitic elements. Bias tees are designed for transmission-line environments.
Typically, the characteristic impedance will be 50 Ohms or 75 Ohms. The impedance of the capacitor ( ) is chosen to be much less than , and the impedance of the inductor ( ) is chosen to be much greater than : \begin{align} X_\text{C} ~&=~ \frac{1}{\omega C} ~=~ \frac{1}{2\pi f C} ~\ll~ Z_\text{o} ~, \\ \\ X_\text{L} ~&=~~ \omega L ~~=~~ 2 \pi f L ~~\gg~ Z_\text{o} ~,\\ \end{align} where is the angular frequency (in radians per second) and is the frequency (in Hertz).
Bias tees are designed to operate over a range of signal frequencies. The reactances are chosen to have minimal impact at the lowest frequency. For wide-range bias tees, the inductive reactance must be large in value, even at the lowest frequency, hence the dimensions of the inductor must be large in size.
A large inductor will have a stray capacitance (which creates its self-resonant frequency). At a high enough frequency, the stray capacitance presents a low-impedance shunt path for the RF signal, and the bias tee becomes ineffective. Practical wide-band bias tees must use elaborate circuit topologies to avoid the shunt path.
Instead of one inductor, there will be a string of inductors in series, each with its own high resonant frequency, in addition to lower composite resonances shared between them. Additional resistors and capacitors will be inserted to prevent resonances. For example, a Picosecond Pulse Labs model 5580 bias tee works from 10 kHz to 15 GHz.
Consequently, the simple design would need an inductance of at least 800 μH ( about 50 ohms at 10 kHz), and that inductor must still look like an inductor at 15 GHz. However, a typical commercial 820 μH inductor has a self-resonant frequency near 1.8 MHz – four orders of magnitude too low.
Johnson gives an example of a wideband microstrip bias tee covering 50 kHz to 1 GHz using four inductors (330 nH, 910 nH, 18 μH, and 470 μH) in series. His design cribbed from a commercial bias tee. He modeled parasitic element values, simulated results, and optimized component selection.
To show the advantage of additional components, Johnson provided a simulation of a bias tee that used just inductors and capacitors without suppression. Johnson provides both simulated and actual performance details. Girardi duplicated and improved on Johnson's design and points out some additional construction issues.
See also
Diplexer
Text derived from https://en.wikipedia.org/w/index.php?oldid=1349176402 under CC BY-SA 4.0; modifications have been made.