Biconical antenna

shape In radio systems, a biconical antenna is a broad-bandwidth antenna made of two roughly conical conductive objects, nearly touching at their points.

Uses your system voice; voice and rate in settings.

≈ 2 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

shape In radio systems, a biconical antenna is a broad-bandwidth antenna made of two roughly conical conductive objects, nearly touching at their points. Biconical antennas are broadband dipole antennas, typically exhibiting a bandwidth of three octaves or more.

A common subtype is the bowtie antenna, essentially a flattened version of the biconical design which is often used for short-range UHF television reception. These are also sometimes referred to as butterfly antennas. Sir Oliver Lodge is the inventor of the biconical antenna.

Properties

The biconical antenna has a broad bandwidth because it is an example of a traveling wave structure; the analysis for a theoretical infinite antenna resembles that of a transmission line. For an infinite antenna, the characteristic impedance at the point of connection is a function of the cone angle only and is independent of the frequency.

Practical antennas have finite length and a definite resonant frequency. A simple conical monopole antenna is a wire approximation of the solid biconical antenna and has increased bandwidth (over a simple monopole).

Applications

Biconical (or "bicon") antennas are often used in electromagnetic interference (EMI) testing either for immunity testing, or emissions testing.

Advantages and drawbacks

While the bicon is very broadband, it exhibits poor transmitting efficiency at frequencies at the low end of its range, resulting in low field strengths when compared to the input power. Log periodic dipole arrays, Yagi–Uda antennas, and reverberation chambers have shown to achieve much higher field strengths for the power input than a simple biconical antenna in an anechoic chamber.

However, when the goal is to fully characterize a modulated or impulse signal, rather than merely measuring peak and average spectrum energy content, a reverberation chamber is a poor choice for a test environment.

See also

Antenna – general introduction to antennas Antenna types – broad review of specific antenna types Bicone – a geometric shape similar to one of a truncated biconical antenna's arms Discone antenna – a halved biconical – easier to construct and erect than a bicone Double cone – the geometric shape of a biconical antenna Electromagnetic reverberation chamber – a test environment in which biconicals may be used Electromagnetic compatibility – general RF issue, involving testing a device's immunity to radio interference Radio transmitter – Describes devices that intentionally emit radio waves, usually by feeding radio-frequency electrical power into an antenna. Television

Text derived from https://en.wikipedia.org/w/index.php?oldid=1350759382 under CC BY-SA 4.0; modifications have been made.

Words in each sectionSee alsoSee alsoSee also: 117 words117Advantages and drawbacksAdvantages and drawbacksAdvantages and drawbacks: 96 words96PropertiesPropertiesProperties: 88 words88ApplicationsApplicationsApplications: 21 words21
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot enwiki-001350759382 · captured 2026-04-23 · ledger · version history

Cite this page as: encyclopegia.org, “Biconical antenna”, snapshot enwiki-001350759382. https://encyclopegia.org/a/biconical-antenna

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.