Bicycle drivetrain systems
gear change, the most popular system in use today with crankset and rear gear hub Bicycle drivetrain systems are used to transmit power on bicycles, tricycles, quadracycles, unicycles, or other human-powered vehicles from the riders to the…
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
gear change, the most popular system in use today with crankset and rear gear hub Bicycle drivetrain systems are used to transmit power on bicycles, tricycles, quadracycles, unicycles, or other human-powered vehicles from the riders to the drive wheels. Most also include some type of a mechanism to convert speed and torque via gear ratios.
gear change, the most popular system in use today]] with crankset and rear gear hub]] Bicycle drivetrain systems are used to transmit power on bicycles, tricycles, quadracycles, unicycles, or other human-powered vehicles from the riders to the drive wheels. Most also include some type of a mechanism to convert speed and torque via gear ratios.
History
]] The history of bicycle drivetrain systems is closely linked to the history of the bicycle. Major changes in bicycle form have often been initiated or accompanied by advances in drivetrain systems. Several early drivetrains used straight-cut gears that meshed directly with each other outside of the hub.
Some bicycles have used a double-sided rear wheel, with different-sized sprockets on each side. To change gears, the rider would stop and dismount, remove the rear wheel and reinstall it in the reverse direction.
Derailleur systems were first developed in the late 19th century, but the modern cable-operated parallelogram derailleur was invented in the 1950s. Draisine Penny-farthing Safety bicycle
Power collection
Bicycle drivetrain systems have been developed to collect power from riders by a variety of methods.
From legs
Crankset, groupset, and pedals Treadle bicycle Vertical foot motion that mimics that of a climbing exercise machine Treadmill bicycle. Elliptical foot motion that mimicks that of an elliptical trainer ElliptiGO Swingbike, a fun-bike where both the front and rear fork can swing, so that the rider can turn both with their hips and with the handlebars, and thereby partially create propulsion with their hips Risigo, a fun-bike where the seat moves up and down in coordination with the crank, so that the hip prevents (or contributes to) propulsion File:Rowbike.jpg|A rowbike File:ElliptiGO Miller Hiwy jeh.jpg|ElliptiGOs
From arms
Handcycle
From whole body
Rowing Hand and foot Exycle: from legs and chest
From multiple riders
Tandem bicycle Sociable, tandem bicycle with side by side seating Conference bike, party bike or pedibus, a bike powered by the passengers, while steering and braking is controlled by a driver who does not provide pedaling power
Power transmission
Bicycle drivetrain systems have been developed to transmit power from riders to drive wheels by a variety of methods. Most bicycle drivetrain systems incorporate a freewheel to allow coasting, but direct-drive and fixed-gear systems do not. The latter are sometimes also described as bicycle brake systems. File:Belt-drive crankset.JPG|A belt-drive crankset File:Stringbike 01.jpg|A wire rope and pulley drive on a stringbike
Direct
Some human powered vehicles, both historical and modern, employ direct-drive. Examples include most Penny-farthings, unicycles, and children's tricycles. Another interpretation of direct-drive is that the rider pushes directly against the ground with a foot, as employed in balance bicycles, kick scooters, and chukudus.
Rotating
Chain Chainline Master link Micro drive Chainless Belt Shaft Wire rope as in the stringbike and rowbike
Non-rotating
Hydraulic Electric, in which turning the cranks generates electricity that then drives an electric motor in the rear wheel.
Two-wheel drive
In 1991, a two-wheel drive bicycle was marketed under the Legacy name. It used a flexible shaft and two bevel gears to transmit torque from the rear wheel, driven by a conventional bicycle chain with derailleurs, to the front wheel. In 1994, Steve Christini and Mike Dunn introduced a two-wheel drive option.
Their AWD system, aimed at mountain bikers, comprises an adapted differential that sends power to the front wheel once the rear begins to slip. In the late 1990s, 2WD 'Dual Power' mountain bikes were sold in Germany under the Subaru name.
They used one belt to transfer power from the rear wheel to the head tube, a small gearbox to allow rotation of the front fork, and then a second belt to transfer power to the front wheel.
Speed and torque conversion
-drive and rear gear hub ]] with direct-drive]] A cyclist's legs produce power optimally within a narrow pedalling speed range. Gearing is optimized to use this narrow range as best as possible. Bicycle drivetrain systems have been developed to convert speed and torque by a variety of methods.
Implementation
Several technologies have been developed to alter gear ratios. They can be used individually, as an external derailleur or an internal hub gear, or in combinations such as the SRAM Dual Drive, which uses a standard 8 or 9-speed cassette mounted on a three-speed internally geared hub, offering a similar gear range as a bicycle with a cassette and triple chainrings.
Derailleur gears Cogset Crankset Hub gear Continuously variable Gearbox bicycle Retro-direct Lever and cam mechanism, as in the stringbike
Control
Shifters Electronic gear-shifting system Autobike
Theory
Bicycle gearing Gear ratio Gear inches
Single-speed
Single-speed bicycle Fixed-gear bicycle
Integration
While several combinations of power collection, transmission, and conversion exist, not all combinations are feasible. For example, a shaft-drive is usually accompanied by a hub gear, and derailleurs are usually implemented with chain drive.
See also
Bicycle gearing Comparison of hub gears List of bicycle types Outline of cycling
Gallery
File:ElliptiGO Miller Hiwy jeh.jpg|ElliptiGO uses motion similar to that of an elliptical trainer for motion on a modern treadle bicycle File:Rainbow h.jpg|Hand crank on a tricycle File:Hildick chainless.jpg|Hildick's chainless bicycle gear (1898) File:Snek roeifiets.JPG|Cable of a row bike
Text derived from https://en.wikipedia.org/w/index.php?oldid=1376208481 under CC BY-SA 4.0; modifications have been made.