Lesson plan
Bilinear transform
The bilinear transform (also known as Tustin's method, after Arnold Tustin) is used in digital signal processing and discrete-time control theory to transform continuous-time system representations to discrete-time and vice versa. The bilinear transform is a special case of a conformal mapping (namely, a Möbius transformation), often used for converting a transfer function H_a(s) of a linear, time-invariant (LTI) filter in the continuous-time domain (often named an analog filter) to a transfer function H_d(z) of a linear, shift-invariant filter in the discrete-time domain (often named a digital filter although there are analog filters constructed with switched capacitors that are discrete-time filters). It maps positions on the j \omega axis, \mathrm{Re}[s]=0 , in the s-plane to the unit circle, |z| = 1 , in the z-plane. Other bilinear transforms can be used for warping the frequency response of any discrete-time linear system (for example to approximate the non-linear frequency resolution of the human auditory system) and are implementable in the discrete domain by replacing a system's unit delays \left( z^{-1} \right) with first order all-pass filters.…
Article summary
The bilinear transform (also known as Tustin's method, after Arnold Tustin) is used in digital signal processing and discrete-time control theory to transform continuous-time system representations to discrete-time and vice versa. The bilinear transform is a special case of a conformal mapping (namely, a Möbius transformation), often used for converting a transfer function H_a(s) of a linear, time-invariant (LTI) filter in the continuous-time domain (often named an analog filter) to a transfer function H_d(z) of a linear, shift-invariant filter in the discrete-time domain (often named a digital filter although there are analog filters constructed with switched capacitors that are discrete-time filters). It maps positions on the j \omega axis, \mathrm{Re}[s]=0 , in the s-plane to the unit circle, |z| = 1 , in the z-plane. Other bilinear transforms can be used for warping the frequency response of any discrete-time linear system (for example to approximate the non-linear frequency resolution of the human auditory system) and are implementable in the discrete domain by replacing a system's unit delays \left( z^{-1} \right) with first order all-pass filters.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.