Bipolar junction transistor

A bipolar junction transistor (BJT) is a type of transistor that uses both electrons and electron holes as charge carriers.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 11 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

A bipolar junction transistor (BJT) is a type of transistor that uses both electrons and electron holes as charge carriers. In contrast, a unipolar transistor, such as a field-effect transistor (FET), uses only one kind of charge carrier.

A bipolar transistor allows a small current injected at one of its terminals to control a much larger current between the remaining two terminals, making the device capable of amplification or switching. BJTs use two p–n junctions between two semiconductor types, n-type and p-type, which are regions in a single crystal of material.

The junctions can be made in several different ways, such as changing the doping of the semiconductor material as it is grown, by depositing metal pellets to form alloy junctions, or by such methods as diffusion of n-type and p-type doping substances into the crystal. The superior predictability and performance of junction transistors quickly displaced the original point-contact transistor.

Diffused transistors, along with other components, are elements of integrated circuits for analog and digital functions. Hundreds of bipolar junction transistors can be made in one circuit at a very low cost.…

A bipolar junction transistor (BJT) is a type of transistor that uses both electrons and electron holes as charge carriers. In contrast, a unipolar transistor, such as a field-effect transistor (FET), uses only one kind of charge carrier.

A bipolar transistor allows a small current injected at one of its terminals to control a much larger current between the remaining two terminals, making the device capable of amplification or switching. BJTs use two p–n junctions between two semiconductor types, n-type and p-type, which are regions in a single crystal of material.

The junctions can be made in several different ways, such as changing the doping of the semiconductor material as it is grown, by depositing metal pellets to form alloy junctions, or by such methods as diffusion of n-type and p-type doping substances into the crystal. The superior predictability and performance of junction transistors quickly displaced the original point-contact transistor.

Diffused transistors, along with other components, are elements of integrated circuits for analog and digital functions. Hundreds of bipolar junction transistors can be made in one circuit at a very low cost.

Bipolar transistor integrated circuits were the main active devices of a generation of mainframe and minicomputers, but computer systems now use complementary metal–oxide–semiconductor (CMOS) integrated circuits relying on the field-effect transistor (FET). Bipolar transistors are still used for amplification of signals, switching, and in mixed-signal integrated circuits using BiCMOS.

Specialized types are used for high voltage and high current switches, or for radio-frequency (RF) amplifiers.

Transistor characteristics: alpha (α) and beta (β)

The proportion of carriers able to cross the base and reach the collector is a measure of the BJT efficiency. The heavy doping of the emitter region and light doping of the base region causes many more electrons to be injected from the emitter into the base than holes to be injected from the base into the emitter.

A thin and lightly doped base region means that most of the minority carriers that are injected into the base will diffuse to the collector and not recombine. \alpha_\text{F} &= \frac{I_\text{C}}{I_\text{E}}, & \beta_\text{F} &= \frac{I_\text{C}}{I_\text{B}}, \\ \alpha_\text{F} &= \frac{\beta_\text{F}}{1 + \beta_\text{F}} & \iff \beta_\text{F} &= \frac{\alpha_\text{F}}{1 - \alpha_\text{F}}. \end{align} Beta is a convenient figure of merit to describe the performance of a bipolar transistor, but is not a fundamental physical property of the device. Bipolar transistors can be considered voltage-controlled devices (fundamentally the collector current is controlled by the base–emitter voltage; the base current could be considered a defect and is controlled by the characteristics of the base–emitter junction and recombination in the base).

In many designs beta is assumed high enough so that base current has a negligible effect on the circuit. In some circuits (generally switching circuits), sufficient base current is supplied so that even the lowest beta value a particular device may have will still allow the required collector current to flow.

The diagram shows a schematic representation of an NPN transistor connected to two voltage sources. (The same description applies to a PNP transistor with reversed directions of current flow and applied voltage.) This applied voltage causes the lower p–n junction to become forward biased, allowing a flow of electrons from the emitter into the base.

In active mode, the electric field existing between base and collector (caused by V CE ) will cause the majority of these electrons to cross the upper p–n junction into the collector to form the collector current I C . The remainder of the electrons recombine with holes, the majority carriers in the base, making a current through the base connection to form the base current, I B . As shown in the diagram, the emitter current, I E , is the total transistor current, which is the sum of the other terminal currents, (i.e. I E  = I B  + I C ). In the diagram, the arrows representing current point in the direction of conventional current – the flow of electrons is in the opposite direction of the arrows because electrons carry negative electric charge. In active mode, the ratio of the collector current to the base current is called the DC current gain.

This gain is usually 100 or more, but robust circuit designs do not depend on the exact value (for example see op-amp). The value of this gain for DC signals is referred to as h_{\text{FE}} , and the value of this gain for small signals is referred to as h_{\text{fe}} .

That is, when a small change in the currents occurs, and sufficient time has passed for the new condition to reach a steady state h_{\text{fe}} is the ratio of the change in collector current to the change in base current. The symbol \beta is used for both h_{\text{FE}} and h_{\text{fe}} . The emitter current is related to V_{\text{BE}} exponentially.

At room temperature, an increase in V_{\text{BE}} by approximately 60 mV increases the emitter current by a factor of 10. Because the base current is approximately proportional to the collector and emitter currents, they vary in the same way.

Ebers–Moll model

The DC emitter and collector currents in active mode are well modeled by an approximation to the Ebers–Moll model: \begin{align} I_\text{E} &= I_\text{ES} \left(e^\frac{V_\text{BE}}{V_\text{T}} - 1\right) \\ I_\text{C} &= \alpha_\text{F} I_\text{E} \\ I_\text{B} &= \left(1 - \alpha_\text{F}\right) I_\text{E} \end{align} The base internal current is mainly by diffusion (see Fick's law) and J_{n\,(\text{base})} = \frac{1}{W} q D_n n_{bo} e^{\frac{V_\text{EB}}{V_\text{T}}} where V_{\text{T}} is the thermal voltage kT/q (approximately 26 mV at 300 K ≈ room temperature). I_{\text{E}} is the emitter current I_{\text{C}} is the collector current \alpha_\text{F} is the common base forward short-circuit current gain (0.98 to 0.998) I_{\text{ES}} is the reverse saturation current of the base–emitter diode (on the order of 10 −15 to 10 −12 amperes) V_{\text{BE}} is the base–emitter voltage D_n is the diffusion constant for electrons in the p-type base W is the base width The \alpha and forward \beta parameters are as described previously.

A reverse \beta is sometimes included in the model. The unapproximated Ebers–Moll equations used to describe the three currents in any operating region are given below.

These equations are based on the transport model for a bipolar junction transistor. \begin{align} i_{\text{C}} &= I_\text{S} \left[ \left(e^\frac{V_\text{BE}}{V_\text{T}} - e^\frac{V_\text{BC}}{V_\text{T}}\right) - \frac{1}{\beta_\text{R}} \left(e^\frac{V_\text{BC}}{V_\text{T}} - 1\right) \right]\\ i_{\text{B}} &= I_\text{S} \left[ \frac{1}{\beta_\text{F}} \left(e^\frac{V_\text{BE}}{V_\text{T}} - 1 \right) + \frac{1}{\beta_\text{R}} \left(e^\frac{V_\text{BC}}{V_\text{T}} - 1\right) \right]\\ i_{\text{E}} &= I_\text{S} \left[ \left(e^\frac{V_\text{BE}}{V_\text{T}} - e^\frac{V_\text{BC}}{V_\text{T}}\right) + \frac{1}{\beta_\text{F}} \left(e^\frac{V_\text{BE}}{V_\text{T}} - 1\right) \right] \end{align} where i_\text{C} is the collector current i_\text{B} is the base current i_\text{E} is the emitter current \beta_\text{F} is the forward common emitter current gain (20 to 500) \beta_\text{R} is the reverse common emitter current gain (0 to 20) I_\text{S} is the reverse saturation current (on the order of 10 −15 to 10 −12 amperes) V_\text{T} is the thermal voltage (approximately 26 mV at 300 K ≈ room temperature). V_\text{BE} is the base–emitter voltage V_\text{BC} is the base–collector voltage As the collector–base voltage ( V_\text{CB} = V_\text{CE} - V_\text{BE} ) varies, the collector–base depletion region varies in size.

An increase in the collector–base voltage, for example, causes a greater reverse bias across the collector–base junction, increasing the collector–base depletion region width, and decreasing the width of the base. This variation in base width often is called the Early effect after its discoverer James M. Early.

Narrowing of the base width has two consequences: There is a lesser chance for recombination within the "smaller" base region. The charge gradient is increased across the base, and consequently, the current of minority carriers injected across the emitter junction increases.

Both factors increase the collector or "output" current of the transistor in response to an increase in the collector–base voltage. h ix = h ie for the common-emitter configuration, the input impedance of the transistor (corresponding to the base resistance r pi ). h rx = h re , a reverse transfer relationship, it represents the dependence of the transistor's (input) I B –V BE curve on the value of (output) V CE . It is usually very small and is often neglected (assumed to be zero) at DC. h fx = h fe , the "forward" current-gain of the transistor, sometimes written h 21 .

This parameter, with lower case "fe" to imply small signal (AC) gain, or more often with capital letters for "FE" (specified as h FE ) to mean the "large signal" or DC current-gain (β DC or often simply β), is one of the main parameters in datasheets, and may be given for a typical collector current and voltage or plotted as a function of collector current. See below. h ox = 1/h oe , the output impedance of transistor.

The parameter h oe usually corresponds to the output admittance of the bipolar transistor and has to be inverted to convert it to an impedance. As shown, the h-parameters have lower-case subscripts and hence signify AC conditions or analyses. For DC conditions they are specified in upper-case.

For the CE topology, an approximate h-parameter model is commonly used which further simplifies the circuit analysis. For this the h oe and h re parameters are neglected (that is, they are set to infinity and zero, respectively). The h-parameter model as shown is suited to low-frequency, small-signal analysis.

For high-frequency analyses the inter-electrode capacitances that are important at high frequencies must be added.

Industry models

The Gummel–Poon SPICE model is often used, but it suffers from several limitations. For instance, reverse breakdown of the base–emitter diode is not captured by the SGP (SPICE Gummel–Poon) model, neither are thermal effects (self-heating) or quasi-saturation. These have been addressed in various more advanced models which either focus on specific cases of application (Mextram, HICUM, Modella) or are designed for universal usage (VBIC).

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373727268 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

30 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.