Lesson plan

Bit cell

A bit cell is the length of tape, the area of disc surface, or the part of an integrated circuit in which a single bit is recorded. The smaller the bit cells are, the greater the storage density of the medium is. In magnetic storage, the magnetic flux or magnetization does not necessarily change at the boundaries of bit cells to indicate bit states. For example, the presence of a magnetic transition within a bit cell might record state 1, and the lack of such a transition might record state 0. Other encodings are also possible.

Back to article

Article summary

A bit cell is the length of tape, the area of disc surface, or the part of an integrated circuit in which a single bit is recorded. The smaller the bit cells are, the greater the storage density of the medium is. In magnetic storage, the magnetic flux or magnetization does not necessarily change at the boundaries of bit cells to indicate bit states. For example, the presence of a magnetic transition within a bit cell might record state 1, and the lack of such a transition might record state 0. Other encodings are also possible.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.