Lesson plan

Bit slip

In digital transmission, bit slip is the loss or gain of a bit or bits, caused by clock drift variations in the respective clock rates of the transmitting and receiving devices. One cause of bit slip is overflow of a receive buffer that occurs when the transmitter's clock rate exceeds that of the receiver. This causes one or more bits to be dropped for lack of storage capacity. One way to maintain timing between transmitting and receiving devices is to employ an asynchronous protocol such as start-stop. Alternatively, bit slip can be prevented by using a self-clocking signal (such as a signal modulated using OQPSK) or using a line coding such as Manchester encoding. Another cause is "losing count", as on a hard drive: if a hard drive encounters a long string of 0s, without any 1s (or a string of 1s without 0s), it may lose track of the frame between fields, and suffer bit slip. When a pulse of N consecutive zero bits are sent, clock drift may cause the hardware to apparently detect N-1 zero bits or N+1 zero bits both kinds of errors are called bit slip. Thus one prevents long strings without change via such devices as run length limited codes. Many communication systems use linear-feedback shift register scrambling to prevent long strings of 0s (or other symbol), including VSAT, 1000BASE-T, , etc.…

Back to article

Article summary

In digital transmission, bit slip is the loss or gain of a bit or bits, caused by clock drift variations in the respective clock rates of the transmitting and receiving devices. One cause of bit slip is overflow of a receive buffer that occurs when the transmitter's clock rate exceeds that of the receiver. This causes one or more bits to be dropped for lack of storage capacity. One way to maintain timing between transmitting and receiving devices is to employ an asynchronous protocol such as start-stop. Alternatively, bit slip can be prevented by using a self-clocking signal (such as a signal modulated using OQPSK) or using a line coding such as Manchester encoding. Another cause is "losing count", as on a hard drive: if a hard drive encounters a long string of 0s, without any 1s (or a string of 1s without 0s), it may lose track of the frame between fields, and suffer bit slip. When a pulse of N consecutive zero bits are sent, clock drift may cause the hardware to apparently detect N-1 zero bits or N+1 zero bits both kinds of errors are called bit slip. Thus one prevents long strings without change via such devices as run length limited codes. Many communication systems use linear-feedback shift register scrambling to prevent long strings of 0s (or other symbol), including VSAT, 1000BASE-T, , etc.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.