Bit-stream access

Article summary

Bit-stream access refers to the situation where a wireline incumbent installs a high-speed access link to the customer's premises (e.g., by installing ADSL equipment in the local access network) and then makes this access link available to third parties, to enable them to provide high-speed services to customers. This type of access does not entail any third-party access to the copper pair in the local loop. The incumbent may also provide transmission services to its competitors, using its Asynchronous Transfer Mode (ATM) or IP network, to carry competitors' traffic from the digital subscriber line access multiplexer (DSLAM) to a higher level in the network hierarchy where new entrants may already have a point of presence (e.g. a transit switch location). Bit-stream handover points thus can be at various levels: * Handover at DSLAM * Handover at ATM-PoP * Handover at IP level Bit-stream access is nowadays considered a key tool for opening competition in the broadband market. It enables competitors to offer their own products to consumers even if they do not operate the local loop (the last mile). Bit-stream access allows the new entrant to use the high-speed modems and other equipment provided by the incumbent and thus avoid maintenance and investments into the local loop.…

Key claims

No claims recorded.

Discussion questions

1. Summarise the article in your own words. Which single claim would you verify first, and why?
2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.