Bit Test

The BT x86 assembly language instruction stands for Bit Test and was added to the x86 instruction set with the 80386 processor.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The BT x86 assembly language instruction stands for Bit Test and was added to the x86 instruction set with the 80386 processor. BT copies a bit from a given register to the carry flag.[1]

Example: copy the third least significant bit from EAX to the carry flag

BT EAX, 2

BTS (Bit Test and Set) operates the same, but also sets the bit in the register,[2] while BTR (Bit Test and Reset) resets it,[3] and BTC (Bit Test and Complement) flips it.[4]


Logical Explanation BT

BT SRC, POSITION SRC Represent as bits array POSITION Represent as numeric position From Right to Left Start at 0 CF Carry Flag Result CF = SRC[POSITION]


Logical Explanation BTC

BTC SRC, POSITION SRC Represent as bits array for CF Result Represent as hex for SRC Result POSITION Represent as numeric position From Right to Left Start at 0 CF Carry Flag Result CF = SRC[POSITION] XOR SRC, POW(2,POSITION)

References

edit edit source
  1. ^ "BT – Bit Test". Retrieved 2011-08-21. Wikipedia revision 1335557802, retrieved 2026-11-19
  2. ^ "BTS – Bit Test and Set". Retrieved 2011-08-21. Wikipedia revision 1335557802, retrieved 2026-11-19
  3. ^ "BTR – Bit Test and Reset". Retrieved 2011-08-21. Wikipedia revision 1335557802, retrieved 2026-11-19
  4. ^ "BTC – Bit Test and Complement". Retrieved 2012-11-04. Wikipedia revision 1335557802, retrieved 2026-11-19

Text derived from https://en.wikipedia.org/w/index.php?oldid=1335557802 under CC BY-SA 4.0; modifications have been made.