Bjerknes' equation
Bjerknes' equation refers to a set of seven different equations formulated by Vilhelm Bjerknes in 1904 which proposes a methodology to study large scale atmospheric motions using different atmospheric variables.
≈ 2 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
Bjerknes' equation refers to a set of seven different equations formulated by Vilhelm Bjerknes in 1904 which proposes a methodology to study large scale atmospheric motions using different atmospheric variables. It was one of the early attempts at model based weather forecasting which was until the early 20th century purely subjective and on an empirical basis.
The derivations made here is hence fundamental to weather models in which it was used at least until the 1950s. {\partial m \over \partial t} = {\partial \over \partial t} \int \rho V = 0 Conservation of Momentum (Euler's equation or Navier–Stokes equation) \rho \, \biggl({\partial \vec u \over\partial t} + (\nabla . \vec u) \vec u\biggr) = - \nabla P + \rho \vec f where \nabla P is the pressure gradient of fluid, \rho \vec f is body force per unit volume and {\partial \vec u \over\partial t} is the local acceleration of the fluid. Conservation of Energy {\partial\rho\over\partial t}(e_{tot}) = - \nabla \, .
[(\rho e_{tot} + P)\vec u] where e_{tot} is the total energy constituted by the internal energy e and kinetic energy u^2 \over 2 {\partial\rho\over\partial t} = - \nabla \, . (\rho \vec u) also written as {\partial\rho\over\partial t} = - \rho \, \nabla . \vec u for incompressible fluids where \partial\rho\over\partial t is rate of change of density, \rho is the density of fluid and \rho \vec u is the mass flux of fluid.
PV = nRT where T is the fluid temperature and R is ideal gas constant \left(p + \frac{a}{V_\text{m}^2}\right)\left(V_\text{m} - b\right) = RT where a is the attraction parameter, b is the repulsion parameter and V_m is the molar volume W + Q = \Delta E where W is the work done on the system, Q is the heat added to the system and \Delta E is the total energy as addition of Kinetic, Potential and Internal energies of the system. Second law of thermodynamics dS \geq 0 where S represents the entropy of an isolated system.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1372159838 under CC BY-SA 4.0; modifications have been made.