Lesson plan

Blanking level

In video technology, blanking level is the level of the composite video signal during the front and back porches of the video signal. The composite video signal is actually the video information superimposed on blanking. The total level of the composite video signal (blanking + video) is 1000 mV. This level can also be given in IRE units such that the level difference reserved for video information is 100 IRE units. So white corresponds to 100 IRE units and blanking level corresponds to 0 IRE units. The level of black is 0 IRE units in the case of CCIR System B and CCIR System G (European systems) and 7.5 IRE units in the case of CCIR System M (American system), although NTSC-J in Japan, also utilizing System M, uses 0 IRE for both black and blanking much like Systems B & G. So, while there is no difference between the black and the blanking levels in most systems, they differ by 50 mV in system M. (When defined in terms of voltage difference, 7.5 IRE units is almost equal to 50 mV.)

Back to article

Article summary

In video technology, blanking level is the level of the composite video signal during the front and back porches of the video signal. The composite video signal is actually the video information superimposed on blanking. The total level of the composite video signal (blanking + video) is 1000 mV. This level can also be given in IRE units such that the level difference reserved for video information is 100 IRE units. So white corresponds to 100 IRE units and blanking level corresponds to 0 IRE units. The level of black is 0 IRE units in the case of CCIR System B and CCIR System G (European systems) and 7.5 IRE units in the case of CCIR System M (American system), although NTSC-J in Japan, also utilizing System M, uses 0 IRE for both black and blanking much like Systems B & G. So, while there is no difference between the black and the blanking levels in most systems, they differ by 50 mV in system M. (When defined in terms of voltage difference, 7.5 IRE units is almost equal to 50 mV.)

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.