Bluejacket 23

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The Bluejacket 23 is a recreational keelboat built by Paceship Yachts in Mahone Bay, Nova Scotia, Canada. At least 107 were built, from 1967 to 1974. The Bluejacket was first offered in the daysailer version, with a roomy cockpit and an open cuddy. In 1970 the MORCEE version was offered, adapted to comply with the Midget Ocean Racing Club Rule (MORC) by fitting a self-bailing cockpit and enclosed cabin.

The Bluejacket 23 is a recreational keelboat built by Paceship Yachts in Mahone Bay, Nova Scotia, Canada. At least 107 were built, from 1967 to 1974. The Bluejacket was first offered in the daysailer version, with a roomy cockpit and an open cuddy. In 1970 the MORCEE version was offered, adapted to comply with the Midget Ocean Racing Club Rule (MORC) by fitting a self-bailing cockpit and enclosed cabin.

Design

Designed by Cuthbertson & Cassian, it is similar to several other Cuthbertson & Cassian designs built in Ontario around the same time, including the Classic 22 by Grampian Marine (which predated the Bluejacket), and the Viking 22 and later Gazelle 22 from Ontario Yachts.

Keel

The fin keel is of cast iron with a double resin coating to prevent corrosion and is of a hydrodynamic design supplying maximum lift with good stability. The keel is mounted to the hull and has a separate moulded keel grid that provides greater strength in this area. The keel is attached with stainless steel flat head bolts, nuts and flat washers. No gasket is used to mount the keel as the mating surfaces are well matched. Keels are mounted at the factory using a silicone marine sealer between the keel and hull.

Rudder

The rudder is a spade type made of fiberglass with a brass rudder stock. The rudder port is a bronze tube with bushings top and bottom. Steering is by tiller. The tiller head is cast bronze and is held on with a pin. This pin passes horizontally through the head and stock. An allen screw locks into a key in the rudder stock. The tiller is straight grained ash. The rudder can be rotated a full 360 degrees if needed.

Deck hardware

The Bluejacket 23 has deck hardware of stainless steel, Marinium, and chromed brass. Fiberglass winch bases mount two No.1 snubbing winches used for headsail sheeting. All hardware is either bolted through or tapped into metal which is bonded into the laminate. The boat includes running lights, interior light, switches, wiring, fuse box, battery and case.

References

External links

Text derived from https://en.wikipedia.org/w/index.php?oldid=1372528059 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

11 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.