BMW 801
German aircraft engine developed by BMW during World War II
≈ 15 min read
Names in other languages
- 中文BMW 801發動機
- ČeštinaBMW 801
- DeutschBMW 801
- EnglishBMW 801
- EspañolBMW 801
- FrançaisBMW 801
- 日本語BMW 801
- SvenskaBMW 801
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The BMW 801 was a German air-cooled 14-cylinder-radial aircraft engine built by BMW and used in a number of German Luftwaffe aircraft of World War II. Production versions of the twin-row engine generated between 1,560 and 2,000 PS (1,540–1,970 hp, or 1,150–1,470 kW). It was the most produced radial engine of Germany in World War II with more than 61,000 built.
The 801 was originally intended to replace existing radial types in German transport and utility aircraft. At the time, it was widely agreed among European designers that an inline engine was a requirement for high performance designs due to its smaller frontal area and resulting lower drag.
Kurt Tank successfully fitted a BMW 801 to a new fighter design he was working on, and as a result the 801 became best known as the power plant for the famous Focke-Wulf Fw 190. The BMW 801 radial also pioneered the use of what would today be designated an engine control unit: its Kommandogerät engine management system took over the operation of several aviation engine management control parameters of the era, allowing proper operation of the engine with just one throttle lever.
The BMW 801 was a German air-cooled 14-cylinder-radial aircraft engine built by BMW and used in a number of German Luftwaffe aircraft of World War II. Production versions of the twin-row engine generated between 1,560 and 2,000 PS (1,540–1,970 hp, or 1,150–1,470 kW). It was the most produced radial engine of Germany in World War II with more than 61,000 built.
The 801 was originally intended to replace existing radial types in German transport and utility aircraft. At the time, it was widely agreed among European designers that an inline engine was a requirement for high performance designs due to its smaller frontal area and resulting lower drag.
Kurt Tank successfully fitted a BMW 801 to a new fighter design he was working on, and as a result the 801 became best known as the power plant for the famous Focke-Wulf Fw 190. The BMW 801 radial also pioneered the use of what would today be designated an engine control unit: its Kommandogerät engine management system took over the operation of several aviation engine management control parameters of the era, allowing proper operation of the engine with just one throttle lever.
Precursor design
In the 1930s, BMW took out a license to build the Pratt & Whitney Hornet engines. By the mid-30s they had introduced an improved version, the BMW 132. The BMW 132 was widely used, most notably on the Junkers Ju 52, which it powered for much of that design's lifetime.
In 1935 the RLM funded prototypes of two much larger radial designs, one from Bramo, the Bramo 329, and another from BMW, the BMW 139. BMW's design used many components from the BMW 132 to create a two-row engine with 14 cylinders, supplying 1,550 PS (1,529 hp, 1,140 kW).
After BMW bought Bramo in 1939 both projects were merged into the BMW 801, learning from the problems encountered in both projects. The BMW 139 was originally intended to be used in roles similar to those of the other German radials, namely bombers and transport aircraft, but midway through the program the Focke-Wulf firm's chief designer, Kurt Tank suggested it for use in the Focke-Wulf Fw 190 fighter project.
Radial engines were rare in European designs as they were considered to have too large a frontal area for good streamlining and would not be suitable for high speed aircraft. They were most popular on naval aircraft, where their easier maintenance and improved reliability were highly valued. Efforts to improve these designs led to new cowling designs that reduced the concerns about drag.
Tank felt that attention to detail could result in a streamlined radial that would not suffer undue drag, and would be competitive with inlines. The main concern was providing cooling air over the cylinder heads, which generally required a very large opening at the front of the aircraft.
Tank's solution for the BMW 139 was to use an engine-driven fan behind an oversized, flow-through hollow prop-spinner open at the extreme front, blowing air past the engine cylinders, with some of it being drawn through S-shaped ducts over a radiator for oil cooling. However this system proved almost impossible to operate properly with the BMW 139; early prototypes of the Fw 190 demonstrated terrible cooling problems.
Although the problems appeared to be fixable, since the engine was already fairly dated in terms of design, in 1938 BMW proposed an entirely new engine designed specifically for fan-cooling that could be brought to production quickly.
801 emerges
, Munich, Germany (2013) The new design was given the name BMW 801 after BMW was given a new block of "109-800" engine numbers by the RLM to use after their merger with Bramo. The 801 retained the 139's older-style single-valve intake and exhaust, while most in-line engines of the era had moved to either three (as Junkers had done) or four valves per cylinder, or in British use for their own radials, sleeve valves.
Several minor advances were worked into the design, including the use of sodium-cooled valves and a direct fuel injection system, manufactured by Friedrich Deckel AG of Munich. The supercharger was rather basic in the early models, using a single-stage two-speed design directly geared to the engine (unlike the DB 601's hydraulically clutched version) which led to rather limited altitude performance, in keeping with its intended medium-altitude usage.
One key advancement for the 801 was the Kommandogerät (command-device), a mechanical-hydraulic unit that automatically adjusted engine fuel flow, propeller pitch, supercharger setting, mixture and ignition timing in response to a single throttle lever, dramatically simplifying engine control. The Kommandogerät could be considered to be a precursor to the engine control units used for many vehicles' internal combustion engines of the late 20th and early 21st centuries.
There was a considerable amount of wind tunnel work done on the engine and BMW-designed forward cowling (incorporating the engine's oil cooler) at the Luftfahrtforschungsanstalt (LFA) facility in Völkenrode, leading to the conclusion it was possible to reduce drag equivalent to . It also maximized the use of positive air pressure to aid cooling of cylinders, heads, and other internal parts.
Importance of continued development
unitized-installation BMW 801 engines. Royal Air Force Museum London (2007) BMW had been required to create priorities for the 14-cylinder production 801 radial, the 18-cylinder BMW 802 and liquid-cooled 28-cylinder BMW 803 radial engines.
The first priority was for the 801 to be developed "to its limits", with the second priority the 802's design and prototype construction, and lastly the complex 803 four-row radial only receiving attention to its design-development. By contrast, Allied equivalents such as the American Wright Twin Cyclone, and the Soviet Shvetsov ASh-82 radials never needed to be developed beyond 1,500 kW as these nations possessed larger-displacement 18-cylinder radial aviation engines capable of more power.
Description
The 801 was a radial engine with two rows of seven cylinders. The cylinders had both bore and stroke of , giving a total capacity of , just a bit less than the American Wright Cyclone 14 twin-row radial of some 1,600 to 1,900 hp output. The unit (including mounts) weighed from 1,010 to 1,250 kg and was about 1.29 m (51 in) across, depending on the model.
The BMW 801 was cooled by forced air with the cooling fan made from a magnesium alloy (probably Elektron), 10-bladed in the initial models, but 12-bladed in most engines. The fan rotated at 1.72 times the crankshaft speed (3.17 times the propeller speed).
Air from the fan was blown into the center of the engine in front of the propeller gearing housing, and the shape of the housing and the engine itself carried the air to the outside of the cowling and across the cylinders. A set of slots or gills at the rear of the cowling allowed the hot air to escape.
This provided effective cooling although at the cost of about 70 PS (69 hp, 51.5 kW) required to drive the fan when the aircraft was at low speed. Above , the fan absorbed little power directly as the vacuum effect of the airflow past the air exits provided the needed flow.
The 801 used a relatively complex system, integral to the BMW-designed, matching forward cowling system, to cool the lubricating oil. A ring-shaped oil cooler core was built into the BMW-provided forward cowl, just behind the fan. The outer portion of the oil cooler's core was in contact with the main cowling's sheetmetal, to possibly act as a heat sink.
Comprising the BMW-designed forward cowl, in front of the oil cooler was a ring of metal with a C-shaped cross-section, with the outer lip lying just outside the rim of the cowl, and the inner side on the inside of the oil cooler core. Together, the metal ring and cowling formed an S-shaped airflow path, with the oil cooler's core contained between them.
Airflow past the gap between the cowl and outer lip of the metal ring produced a vacuum effect that pulled air from the front of the engine outward and forward within the cowl's frontmost inner area just behind the fan, flowing forward across the oil cooler core in a separate airflow path from the rearwards-direction flow that cooled the engine's cylinders, just to provide cooling for the 801's oil. The rate of cooling airflow over the core could be controlled by moving the metal ring slightly forward or aft in order to open or close the gap.
The reasons for this complex system were threefold. One was to eliminate any extra aerodynamic drag that a protruding oil cooler would produce, in this case eliminating the extra drag factor by enclosing it within the engine's forward cowling. The second was to warm the air before it flowed to the oil cooler's circular-shaped core to aid warming the oil during starting.
Finally, by placing the oil cooler behind the fan, cooling was provided even while the aircraft was parked. The downside to this design was that the oil cooler was in an extremely vulnerable location, and the metal ring was increasingly armoured as the war progressed.
Engine mounting formats
transport glider. Russia, March 1943. Note the engine is already fitted with its cowling The design of the BMW 801's cowling was key to its proper cooling, which BMW designed and built themselves and supplied with the engine.
The design evolved throughout the war, including an extension to the engine mounts that allowed for larger cooling gills. This factory-supplied cowling also improved the simplicity of engine replacement in the field in more completely "unitizing" a BMW 801 radial engine, with as many of its auxiliary systems as possible being simultaneously replaceable with the engine itself, as opposed to opening or removing a "separate" cowling attached to the fuselage of the aircraft.
Engines were typically delivered from BMW complete in their cowling, ready to be bolted to the front of the aircraft or nacelle, since 1942 as Motoranlage (M) and 1944/1945 as Triebwerksanlage (T). The Motoranlage was the original form of the interchangeable Kraftei, or "power-egg", unitized powerplant installation concept used in many German wartime aircraft. It was most often used with twin and multi-engined designs, with some need for external add-ons.
The more comprehensive Triebwerksanlage format for unitization consolidated more of the engine's required accessory systems beyond what the earlier Motoranlage concept could, plus some external mountings, such as an integrally complete exhaust system (including a turbocharger, if fitted as part of the design), as a completely interchangeable unit. Both M and T formats were also used with various inline engines, like the Daimler-Benz DB 603 used for both the inline-engined versions of the Do 217 and the enormous BV 238 flying boat, and the Junkers Jumo 213 powerplants used for later marks of the Ju 88 multirole aircraft.
The M and T unitized engine formats added secondary designator suffixes, which especially for the 801 radial (and perhaps others), did not always match the letter suffix that designated the bare radial engine used for a particular unitized installation, confusing the naming of the 801 engine series' subtypes considerably. These suffix designators initially referred to these complete kits and their "bare" engine counterparts almost interchangeably.
The A, B and L models were known (logically) as Motoranlage style MA, MB and ML engines in this form, but the common D-2 was instead known as the MG. As the war wore on the confusion increased, the E model was delivered as the Triebwerksanlage style TG or TH, seemingly suggesting a relation to the G and H engines, but in fact those were delivered as the TL and TP.
It is rather common to see the turbocharged versions referred to only with the T for the more completely unitized Triebwerksanlage installations, notably the (most notoriously of all) TJ for the BMW 801J turbocharged radial subtype, and the TQ models, further confusing the issue.
Variants
Data from Gersdorff and Bingham BMW 801 A, C, L (B) 1,560 PS (1,539 hp, 1,147 kW), original, 87 octane fuel series. 801C/L had automatic propeller pitch system. Compression ratio: 6.5.
Supercharger Gear Ratios: 5.04 and 7.46. BMW 801 D-2, Q-2, G-2, (H-2) 1,700 PS (1,677 hp, 1,250 kW), first 100 octane fuel series. Increased boost, gear- and compression ratios.
The Q-2 had bi-fuel system and provision for nitrous-oxide injection as well as an enlarged oil cooler with thicker armor . Compression ratio: 7.2. Supercharger Gear Ratios: 5.31 and 8.31 BMW 801 E, S, R 2,000 PS (1,973 hp, 1,471 kW) takeoff-rating, improved series.
The E could deliver 2,300 PS in 5-minute overboost, the S could deliver 2,200 PS in special-emergency. 801R bi-fuel with two-stage supercharging. The dry weight of the 801R was 1796 kilogramms.
E and S with same gear ratios with first gear ratio increased from 5.31 to 6. The S used parts from E and F versions and the supercharger of the E. The S had improved and simplified master controller and was produced from 1944. BMW 801 F 2,400 PS (2,367 hp, 1,765 kW), 2,600 PS on test bench in 1945.
Higher critical-altitude, strengthened components, fuel injector pump with larger capacity, improved aerodynamics and new supercharger intake. Development halted by the end of the war BMW 801 J 1,810 PS (1,785 hp, 1331 kW), turbocharged production version. A D-2 engine with additional Turbocharging.
The turbocharger's blades were air-cooled. Dry weight: 1607 kilogramms. Length: 2555 mm.
Applications
Blohm & Voss BV 141 Blohm & Voss BV 144 Dornier Do 217 Focke-Wulf Fw 190 Focke-Wulf Fw 191 Heinkel He 277 (as designed for Amerikabomber role) Junkers Ju 88 Junkers Ju 188 Junkers Ju 288 (as temporary fitment, in place of intended Jumo 222 engines) Junkers Ju 388 Junkers Ju 290 Junkers Ju 390 Messerschmitt Me 264 (replacing original Jumo 211 fitment)
Bibliography
Gersdorff, Kyrill von, Kurt Grasmann, Helmut Schubert: Flugmotoren und Strahltriebwerke. Bernard & Graefe Verlag, 1995, ISBN 3-7637-6107-1.
External links
Ju388 website Technical drawing of a BMW 801A in high resolution Technical drawing of a BMW 801D in high resolution Engine run of a BMW 801 in 2010
Text derived from https://en.wikipedia.org/w/index.php?oldid=1373954106 under CC BY-SA 4.0; modifications have been made.