BMW R27

motorcycle

Uses your system voice; voice and rate in settings.

≈ 3 min read

Cite, export and learn8 citation formats · 8 exports · lesson and quiz

Names in other languages

  • ČeštinaBMW R 27
  • DeutschBMW R 27
  • PolskiBMW R 27
  • EnglishBMW R27
  • EspañolBMW R27
  • FrançaisBMW R27
  • NederlandsBMW R27
  • PortuguêsBMW R27

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The 247 cc BMW R27, introduced in 1960, is a shaft-driven, single in-line cylinder motorcycle manufactured by BMW.

The 247 cc BMW R27, introduced in 1960, is a shaft-driven, single in-line cylinder motorcycle manufactured by BMW.

History

After World War II, the Potsdam Agreement of the USSR, USA, and the UK, prohibited BMW Aktiengesellschaft (AG) from building motorcycles. Later, this ban was lifted and in 1948 BMW produced its first postwar motorcycle, the 250 cc R24, which was based largely on the prewar R23. It was the only postwar BMW motorcycle produced without a rear suspension.

BMW introduced the R25 model, with plunger rear suspension, in 1950. The last of the plunger models, the R25/3, was introduced in 1953.

R26

In 1956 BMW introduced a completely revamped single-cylinder engine, the R26 (engine numbers 340 001 – 370 236), with improvements paralleling those introduced at the same time in the boxer twins. The R26 came with an enclosed drive shaft, rear swingarm, and front Earles forks.

A new headlight nacelle came with a sliding black plastic over the ignition key, and the “bell-bottom” front fender was dropped along with the mechanics' hand shifter. The engine of the R26 was bolted directly to the frame, and produced .

R27

Based largely on the R26, in 1960 the R27 added rubber mounts for the engine and boosted power to . The 250 cc OHV vertical single was the only rubber-mounted thumper engine BMW ever produced, and was their last shaft drive single-cylinder motorcycle. The engine pumped out , the highest ever for a shaft-drive BMW single.

BMW manufactured 15,364 R27 models (engine numbers 372 001 – 387 566 ) over the production years of 1960 to 1966. Some of the 1966 R27 models were sold as 1967 models because dealers in those years often would assign dates to BMW motorcycles when they sold them, and not necessarily when they were manufactured.

BMW did things differently from other manufacturers, which is evident in the R27. Its enclosed shaft final drive is rare for a single cylinder motorcycle, but it also had a triangulated Earles front fork (named after English designer Ernest Earles), meaning the motorcycle had a front swing arm as well as a rear swing arm.

When the front brake lever was squeezed hard, the front end didn't dive, but rather rose slightly. Thus, braking was a very steady activity, even if they were weak by today's standards. The engine's crankshaft was laid out fore-and-aft rather than side-to-side, which was also a rare feature on motorcycles.

This way, the crank and the final shaft were in line, and drive forces did not have to be run through a set of 90-degree gears. The kick starter also swung out sideways instead of parallel to the frame.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1367210261 under CC BY-SA 4.0; modifications have been made.

Words in each sectionR27R27R27: 279 words279R26R26R26: 85 words85HistoryHistoryHistory: 83 words83
Words in each section. Measured from the stored article body; sections below the minimum are not plotted.

Provenance

snapshot bmw-r27-091341-31d3d83e8c755f9c · hash 31d3d83e8c755f9c49a18f87c98cc60678eb8840a96d5ef03c26d284b7664469 · captured 2026-08-01 · ledger · version history

Cite this page as: encyclopegia.org, “BMW R27”, snapshot bmw-r27-091341-31d3d83e8c755f9c. https://encyclopegia.org/a/bmw-r27

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.