---
title: Booting
slug: booting
qid: 
snapshot: enwiki-001371988849
content_hash: 
license: CC BY-SA 4.0
source: https://en.wikipedia.org/w/index.php?oldid=1371988849
tags: [125876068, 22903407, 22903516, 22917234, 22942188, 22985424, 23603337, 24745122, 26220375, 37229048, 63712521]
---

# Booting

> [!note] Provenance
> Snapshot `enwiki-001371988849` · content root `…`
> Derived from <https://en.wikipedia.org/w/index.php?oldid=1371988849> · Licensed CC BY-SA 4.0

booting In computing, booting is the process of starting a computer as initiated via hardware such as a physical button on the computer or by a software command. After it is switched on, a computer's central processing unit (CPU) has no software in its main memory, so some process must load software into memory before it can be executed. This may be done by hardware or firmware in the CPU, or by a separate processor in the computer system. On some systems, a power-on reset (POR) does not initiate booting, and the operator must initiate booting after POR completes. IBM uses the term Initial Program Load (IPL) on some product lines. Restarting a computer is also called rebooting, which can be , e.g., after electrical power to the CPU is switched from off to on, or , where the power is not cut. On some systems, a soft boot may optionally clear RAM to zero. Both hard and soft booting can be initiated by hardware, such as a button press, or by a software command. Booting is complete when the operative runtime system, typically the operating system and some applications, is attained. The process of returning a computer from a state of sleep (suspension) does not involve booting; however, restoring it from a state of hibernation does.…

booting In computing, booting is the process of starting a computer as initiated via hardware such as a physical button on the computer or by a software command. After it is switched on, a computer's central processing unit (CPU) has no software in its main memory, so some process must load software into memory before it can be executed. This may be done by hardware or firmware in the CPU, or by a separate processor in the computer system. On some systems, a power-on reset (POR) does not initiate booting, and the operator must initiate booting after POR completes. IBM uses the term Initial Program Load (IPL) on some product lines. Restarting a computer is also called rebooting, which can be , e.g., after electrical power to the CPU is switched from off to on, or , where the power is not cut. On some systems, a soft boot may optionally clear RAM to zero. Both hard and soft booting can be initiated by hardware, such as a button press, or by a software command. Booting is complete when the operative runtime system, typically the operating system and some applications, is attained. The process of returning a computer from a state of sleep (suspension) does not involve booting; however, restoring it from a state of hibernation does. Minimally, some embedded systems do not require a noticeable boot sequence to begin functioning, and when turned on, may simply run operational programs that are stored in read-only memory (ROM). All computing systems are state machines, and a reboot may be the only method to return to a designated initial state from an unintended, fault state. Booting was first described in the 1950s as the "bootstrap technique", so is short for bootstrap and derives from the phrase to pull oneself up by one's bootstraps. The earliest known recorded use of "boot" as the shortened form for "bootstrap" is 1975. The usage calls attention to the requirement that, if most software is loaded onto a computer by other software already running on the computer, some mechanism must exist to load the initial software onto the computer. Early computers used a variety of ad-hoc methods to get a small program (the bootstrap loader or ) into memory to solve this problem. The invention of ROM of various types solved this paradox by allowing computers to be shipped with a start-up program, stored in the boot ROM of the computer, that could not be erased. Growth in the capacity of ROM has allowed ever more elaborate start-up procedures to be implemented. IBM coined this term for the 7030 (Stretch), revived it for the design of the System/360, and continues to use it in those environments today. In the System/360 processors, an IPL is initiated by the computer operator by selecting the three hexadecimal digit device address (CUU; C=I/O Channel address, UU=Control unit and Device address ) followed by pressing the LOAD button. On the high end System/360 models, most System/370 and some later systems, the functions of the switches and the LOAD button are simulated using selectable areas on the screen of a graphics console, often an IBM 2250-like device or an IBM 3270-like device. For example, on the System/370 Model 158, the keyboard sequence 0-7-X (zero, seven and X, in that order) results in an IPL from the device address that was keyed into the input area. The Amdahl 470V/6 and related CPUs supported four hexadecimal digits on those CPUs that had the optional second channel unit installed, for a total of 32 channels. Later, IBM would also support more than 16 channels. The IPL function in the System/360 and its successors prior to IBM Z, and its compatibles, such as Amdahl's, reads 24 bytes from an operator-specified device into main storage starting at real address zero. The second and third groups of eight bytes are treated as Channel Command Words (CCWs) to continue loading the startup program (the first CCW is always simulated by the CPU and consists of a Read IPL command, , with command chaining and suppress incorrect length indication being enforced). When the I/O channel commands are complete, the first group of eight bytes is then loaded into the processor's Program Status Word (PSW) and the startup program begins execution at the location designated by that PSW. The IPL device is usually a disk drive, hence the special significance of the read-type command, but exactly the same procedure is also used to IPL from other input-type devices, such as tape drives, or even card readers, in a device-independent manner, allowing, for example, the installation of an operating system on a brand-new computer from an OS initial distribution magnetic tape. For disk controllers, the command also causes the selected device to seek to cylinder , head , simulating a Seek cylinder and head command, , and to search for record , simulating a Search ID Equal command, ; seeks and searches are not simulated by tape and card controllers, as for these device classes a Read IPL command is simply a sequential read command. The disk, tape or card deck must contain a special program to load the actual operating system or standalone utility into main storage, and for this specific purpose, "IPL Text" is placed on the disk by the stand-alone DASDI (Direct Access Storage Device Initialization) program or an equivalent program running under an operating system, e.g., ICKDSF, but IPL-able tapes and card decks are usually distributed with this "IPL Text" already present. IBM introduced some evolutionary changes in the IPL process, changing some details for System/370 Extended Architecture (S/370-XA) and later, and adding a new type of IPL for z/Architecture. ====Minicomputers==== The Data General Nova 1200 (1970) and Nova 800 (1971) had a program load switch that, in combination with options that provided two ROM chips, loaded a program into main memory from those ROM chips and jumped to it. Digital Equipment Corporation introduced the integrated-circuit-ROM-based BM873 (1974), M9301 (1977), M9312 (1978), REV11-A and REV11-C, MRV11-C, and MRV11-D ROM memories, all usable as bootstrap ROMs. The PDP-11/34 (1976), PDP-11/60 (1977), PDP-11/24 (1979), and most later models include boot ROM modules. An Italian telephone switching computer, called "Gruppi Speciali", patented in 1975 by Alberto Ciaramella, a researcher at CSELT, included an (external) ROM. Gruppi Speciali was, starting from 1975, a fully single-button machine booting into the operating system from a ROM memory composed of semiconductors, not ferrite cores. Although the ROM device was not natively embedded in the computer of Gruppi Speciali, due to the design of the machine, it also allowed the single-button ROM booting in machines not designed for that (therefore, this "bootstrap device" was architecture-independent), e.g., the PDP-11. Storing the state of the machine after the switch-off was also in place, which was another critical feature in the telephone switching contest. Some minicomputers and superminicomputers include a separate console processor that bootstraps the main processor. The PDP-11/44 had an Intel 8085 as a console processor; the VAX-11/780, the first member of Digital's VAX line of 32-bit superminicomputers, had an LSI-11-based console processor, and the VAX-11/730 had an 8085-based console processor. These console processors could boot the main processor from various storage devices. Some other superminicomputers, such as the VAX-11/750, implement console functions, including the first stage of booting, in CPU microcode. ====Microprocessors and microcomputers==== Typically, a microprocessor will, after a reset or power-on condition, perform a start-up process that usually takes the form of "begin execution of the code that is found starting at a specific address" or "look for a multibyte code at a specific address and jump to the indicated location to begin execution". A system built using that microprocessor will have the permanent ROM occupying these special locations so that the system always begins operating without operator assistance. For example, Intel x86 processors always start by running the instructions beginning at F000:FFF0, while for the MOS 6502 processor, initialization begins by reading a two-byte vector address at $FFFD (MS byte) and $FFFC (LS byte) and jumping to that location to run the bootstrap code. Apple Computer's first computer, the Apple 1, introduced in 1976, featured PROM chips that eliminated the need for a front panel for the boot process (as was the case with the Altair 8800) in a commercial computer. According to Apple's ad announcing it, "No More Switches, No More Lights ... the firmware in PROMS enables you to enter, display and debug programs (all in hex) from the keyboard." Due to the expense of read-only memory at the time, the Apple II booted its disk operating systems using a series of very small incremental steps, each passing control onward to the next phase of the gradually more complex boot process. (See Apple DOS: Boot loader). Because so little of the disk operating system relied on ROM, the hardware was also extremely flexible and supported a wide range of customized disk copy protection mechanisms. (See Software Cracking: History.) Some operating systems, most notably pre-1995 Macintosh systems from Apple, are so closely interwoven with their hardware that it is impossible to natively boot an operating system other than the standard one. This is the opposite extreme of the scenario using switches mentioned above; it is highly inflexible but relatively error-proof and foolproof as long as all hardware is working normally. A common solution in such situations is to design a boot loader that works as a program belonging to the standard OS that hijacks the system and loads the alternative OS. This technique was used by Apple for its A/UX Unix implementation and copied by various freeware operating systems and BeOS Personal Edition 5. Some machines, like the Atari ST microcomputer, were "instant-on", with the operating system executing from a ROM. Retrieval of the OS from secondary or tertiary store was thus eliminated as one of the characteristic operations for bootstrapping. To allow system customizations, accessories, and other support software to be loaded automatically, the Atari's floppy drive was read for additional components during the boot process. There was a timeout delay that provided time to manually insert a floppy as the system searched for the extra components. This could be avoided by inserting a blank disk. The Atari ST hardware was also designed so the cartridge slot could provide native program execution for gaming purposes as a holdover from Atari's legacy making electronic games; by inserting the Spectre GCR cartridge with the Macintosh system ROM in the game slot and turning the Atari on, it could "natively boot" the Macintosh operating system rather than Atari's own TOS. The IBM Personal Computer included ROM-based firmware called the BIOS; one of the functions of that firmware was to perform a power-on self test when the machine was powered up, and then to read software from a boot device and execute it. Firmware compatible with the BIOS on the IBM Personal Computer is used in IBM PC compatible computers. The UEFI was developed by Intel, originally for Itanium-based machines, and later also used as an alternative to the BIOS in x86-based machines, including Apple Macs using Intel processors. Unix workstations originally had vendor-specific ROM-based firmware. Sun Microsystems later developed OpenBoot, later known as Open Firmware, which incorporated a Forth interpreter, with much of the firmware being written in Forth. It was standardized by the IEEE as IEEE standard ; firmware that implements that standard was used in PowerPC-based Macs and some other PowerPC-based machines, as well as Sun's own SPARC-based computers. The Advanced RISC Computing specification defined another firmware standard, which was implemented on some MIPS-based and Alpha-based machines and the SGI Visual Workstation x86-based workstations. == Modern boot loaders == When a computer is turned off, its software including operating systems, application code, and data remains stored on non-volatile memory. When the computer is powered on, it typically does not have an operating system or its loader in random-access memory (RAM). The computer first executes a relatively small program stored in read-only memory (ROM, and later EEPROM, NOR flash) which support execute in place, to initialize CPU and motherboard, to initialize the memory (especially on x86 systems), to initialize and access the storage (usually a block-addressed device, e.g. hard disk drive, NAND flash, solid-state drive) from which the operating system programs and data can be loaded into RAM, and to initialize other I/O devices. The small program that starts this sequence is known as a bootstrap loader, bootstrap or boot loader. Often, multiple-stage boot loaders are used, during which several programs of increasing complexity load one after the other in a process of chain loading. Some earlier computer systems, upon receiving a boot signal from a human operator or a peripheral device, may load a very small number of fixed instructions into memory at a specific location, initialize at least one CPU, and then point the CPU to the instructions and start their execution. These instructions typically start an input operation from some peripheral device (which may be switch-selectable by the operator). Other systems may send hardware commands directly to peripheral devices or I/O controllers that cause an extremely simple input operation (such as "read sector zero of the system device into memory starting at location 1000") to be carried out, effectively loading a small number of boot loader instructions into memory; a completion signal from the I/O device may then be used to start execution of the instructions by the CPU. Smaller computers often use less flexible but more automatic boot loader mechanisms to ensure that the computer starts quickly and with a predetermined software configuration. In many desktop computers, for example, the bootstrapping process begins with the CPU executing software contained in ROM (for example, the BIOS of an IBM PC) at a predefined address (some CPUs, including the Intel x86 series are designed to execute this software after reset without outside help). This software contains rudimentary functionality to search for devices eligible to participate in booting, and load a small program from a special section (most commonly the boot sector) of the most promising device, typically starting at a fixed entry point such as the start of the sector. Boot loaders may face peculiar constraints, especially in size; for instance, on the IBM PC and compatibles, the boot code must fit in the Master Boot Record (MBR) and the Partition Boot Record (PBR), which in turn are limited to a single sector; on the IBM System/360, the size is limited by the IPL medium, e.g., card size, track size. On systems with those constraints, the first program loaded into RAM may not be sufficiently large to load the operating system and, instead, must load another, larger program. The first program loaded into RAM is called a first-stage boot loader, and the program it loads is called a second-stage boot loader. On many embedded CPUs, the CPU built-in boot ROM, sometimes called the zero-stage boot loader, can find and load first-stage boot loaders. === Second-stage boot loaders === Second-stage (OS initialization stage) boot loaders, such as shim, GNU GRUB, rEFInd, BOOTMGR, Syslinux, and NTLDR, are not themselves operating systems, but are able to load an operating system properly and transfer execution to it; the operating system subsequently initializes itself and may load extra device drivers. The second-stage boot loader does not need drivers for its own operation, but may instead use generic storage access methods provided by system firmware such as the BIOS, UEFI or Open Firmware, though typically with restricted hardware functionality and lower performance. Many boot loaders (like GNU GRUB, rEFInd, Windows's BOOTMGR, Syslinux, and Windows NT/2000/XP's NTLDR) can be configured to give the user multiple booting choices. These choices can include different operating systems (for dual or multi-booting from different partitions or drives), different versions of the same operating system (in case a new version has unexpected problems), different operating system loading options (e.g., booting into a rescue or safe mode), and some standalone programs that can function without an operating system, such as memory testers (e.g., memtest86+), a basic shell (as in GNU GRUB), or even games (see List of PC Booter games). Some boot loaders can also load other boot loaders; for example, GRUB loads BOOTMGR instead of loading Windows directly. Usually, a default choice is preselected with a time delay during which a user can press a key to change the choice; after this delay, the default choice is automatically run so normal booting can occur without interaction. The boot process can be considered complete when the computer is ready to interact with the user, or the operating system is capable of running system programs or application programs. bootable flash drive, a Live USB example|link=Windows To Go The boot device is the storage device from which the operating system is loaded. A modern PC's UEFI or BIOS firmware supports booting from various devices, typically a local solid-state drive or hard disk drive via the GPT or Master Boot Record (MBR) on such a drive or disk, an optical disc drive (using El Torito), a USB mass storage device (USB flash drive, memory card reader, USB hard disk drive, USB optical disc drive, USB solid-state drive, etc.), or a network interface card (using PXE). Older, less common BIOS-bootable devices include floppy disk drives, Zip drives, and LS-120 drives. IBM-compatible PCs are examples that use horizontal integrated hardware and UEFI/BIOS firmware. Typically, the system firmware (UEFI or BIOS) will allow the user to configure a boot order. If the boot order is set to "first, the DVD drive; second, the hard disk drive", then the firmware will try to boot from the DVD drive, and if this fails (e.g., because there is no DVD in the drive), it will try to boot from the local hard disk drive. For example, on a PC with Windows installed on the hard drive, the user could set the boot order to the one given above, and then insert a Linux Live CD in order to try out Linux without having to install an operating system onto the hard drive. This is an example of dual booting, in which the user chooses which operating system to start after the computer has performed its power-on self-test (POST). In this example of dual booting, the user chooses by inserting or removing the DVD from the computer, but it is more common to choose which operating system to boot by selecting from a boot manager menu on the selected device, by using the computer keyboard to select from a BIOS or UEFI boot menu, or both; the boot menu is typically entered by pressing or keys during the POST; the BIOS setup is typically entered by pressing or keys during the POST. Several devices are available that enable the user to quick-boot into what is usually a variant of Linux for various simple tasks such as Internet access; examples are Splashtop and Latitude ON. ===Bootloop=== When debugging a concurrent and distributed system of systems, a bootloop (also written boot loop or boot-loop) is a diagnostic condition of an erroneous state that occurs on computing devices; when those devices repeatedly fail to complete the booting process and restart before a boot sequence is finished, a restart might prevent a user from accessing the regular interface. ====Detection of an erroneous state==== The system might exhibit its erroneous state in, for example, an explicit bootloop or a blue screen of death, before recovery is indicated. Detection of an erroneous state may require a distributed event store and stream-processing platform for real-time operation of a distributed system. ====Recovery from an erroneous state==== An erroneous state can trigger bootloops; this state can be caused by misconfiguration from previously known-good operations. Recovery attempts from that erroneous state then enter a reboot, in an attempt to return to a known-good state. In Windows OS operations, for example, the recovery procedure was to reboot three times, the reboots needed to return to a usable menu. ====Recovery policy==== Recovery might be specified via Security Assertion Markup Language (SAML), which can also implement Single sign-on (SSO) for some applications; in the zero trust security model, identification, authorization, and authentication are separable concerns in an SSO session. When recovery of a site is indicated (viz., a blue screen of death is displayed on an airport terminal screen) personal site visits might be required to remediate the situation.
