Lesson plan

Bootloader

, a popular free-software bootloader , a popular boot manager for EFI and UEFI systems A bootloader, also spelled as boot loader or called bootstrap loader, is a computer program that is responsible for booting a computer and booting an operating system. If it also provides an interactive menu with multiple boot choices then it is often called a boot manager. When a computer is turned off, its software including operating systems, application code, and data remains stored on non-volatile memory. When the computer is powered on, it typically does not have an operating system or its loader in random-access memory (RAM). The computer first executes a relatively small program stored in the boot ROM, which is read-only memory (ROM, and later EEPROM, NOR flash) along with some needed data, to initialize hardware devices such as CPU, motherboard, memory, storage and other I/O devices, to access the nonvolatile device (usually a block device, e.g., NAND flash) or devices from which the operating system programs and data can be loaded into RAM. Some earlier computer systems, upon receiving a boot signal from a human operator or a peripheral device, may load a very small number of fixed instructions into memory at a specific location, initialize at least one CPU, and then point the CPU to the instructions and start their execution.…

Back to article

Article summary

, a popular free-software bootloader , a popular boot manager for EFI and UEFI systems A bootloader, also spelled as boot loader or called bootstrap loader, is a computer program that is responsible for booting a computer and booting an operating system. If it also provides an interactive menu with multiple boot choices then it is often called a boot manager. When a computer is turned off, its software including operating systems, application code, and data remains stored on non-volatile memory. When the computer is powered on, it typically does not have an operating system or its loader in random-access memory (RAM). The computer first executes a relatively small program stored in the boot ROM, which is read-only memory (ROM, and later EEPROM, NOR flash) along with some needed data, to initialize hardware devices such as CPU, motherboard, memory, storage and other I/O devices, to access the nonvolatile device (usually a block device, e.g., NAND flash) or devices from which the operating system programs and data can be loaded into RAM. Some earlier computer systems, upon receiving a boot signal from a human operator or a peripheral device, may load a very small number of fixed instructions into memory at a specific location, initialize at least one CPU, and then point the CPU to the instructions and start their execution.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.