Lesson plan
Bootstrap current
In a toroidal fusion power device, a plasma is confined within a donut-shaped cylinder. If the gas pressure of the plasma varies across the radius of the cylinder, a self-generated current will spontaneously arise within the plasma, due to collisions between trapped particles and passing particles. This current is called the bootstrap current, and is commonly found in tokamak fusion devices. The tokamak uses a combination of external magnets and a current driven in the plasma to create a stable confinement system. One goal of advanced tokamak designs is to maximize the bootstrap current, and thereby reduce or eliminate the need for an external current driver. This could dramatically reduce the cost and complexity of the device. From a kinetic point of view, the bootstrap current is the effect of trapped particles (which practically lie on poloidal plane) and density gradient: the poloidal current due to trapped particles motion is unbalanced since the density is not constant, therefore the bootstrap current is needed to "close the circuit".
Article summary
In a toroidal fusion power device, a plasma is confined within a donut-shaped cylinder. If the gas pressure of the plasma varies across the radius of the cylinder, a self-generated current will spontaneously arise within the plasma, due to collisions between trapped particles and passing particles. This current is called the bootstrap current, and is commonly found in tokamak fusion devices. The tokamak uses a combination of external magnets and a current driven in the plasma to create a stable confinement system. One goal of advanced tokamak designs is to maximize the bootstrap current, and thereby reduce or eliminate the need for an external current driver. This could dramatically reduce the cost and complexity of the device. From a kinetic point of view, the bootstrap current is the effect of trapped particles (which practically lie on poloidal plane) and density gradient: the poloidal current due to trapped particles motion is unbalanced since the density is not constant, therefore the bootstrap current is needed to "close the circuit".
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.