Lesson plan

BRLESC

The BRLESC I (Ballistic Research Laboratories Electronic Scientific Computer) was one of the last of the first-generation electronic computers. It was built by the United States Army's Ballistic Research Laboratory (BRL) at Aberdeen Proving Ground with assistance from the National Bureau of Standards (now the National Institute of Standards and Technology), and was designed to take over the computational workload of EDVAC and ORDVAC, which themselves were successors of ENIAC. It began operation in 1962. The Ballistic Research Laboratory became a part of the U.S. Army Research Laboratory in 1992. BRLESC was designed primarily for scientific and military tasks requiring high precision and high computational speed, such as ballistics problems, army logistical problems, and weapons systems evaluations. It contained 1727 vacuum tubes and 853 transistors and had a memory of 4096 68-bit words. BRLESC employed punched cards, magnetic tape, and a magnetic drum as input-output devices, which could be operated simultaneously. It was capable of five million (bitwise) operations per second. A fixed-point addition took 5 microseconds, a floating-point addition took 5 to 10 microseconds, a multiplication (fixed- or floating-point) took 25 microseconds, and a division (fixed- or floating-point) took 65 microseconds.…

Back to article

Article summary

The BRLESC I (Ballistic Research Laboratories Electronic Scientific Computer) was one of the last of the first-generation electronic computers. It was built by the United States Army's Ballistic Research Laboratory (BRL) at Aberdeen Proving Ground with assistance from the National Bureau of Standards (now the National Institute of Standards and Technology), and was designed to take over the computational workload of EDVAC and ORDVAC, which themselves were successors of ENIAC. It began operation in 1962. The Ballistic Research Laboratory became a part of the U.S. Army Research Laboratory in 1992. BRLESC was designed primarily for scientific and military tasks requiring high precision and high computational speed, such as ballistics problems, army logistical problems, and weapons systems evaluations. It contained 1727 vacuum tubes and 853 transistors and had a memory of 4096 68-bit words. BRLESC employed punched cards, magnetic tape, and a magnetic drum as input-output devices, which could be operated simultaneously. It was capable of five million (bitwise) operations per second. A fixed-point addition took 5 microseconds, a floating-point addition took 5 to 10 microseconds, a multiplication (fixed- or floating-point) took 25 microseconds, and a division (fixed- or floating-point) took 65 microseconds.…

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.