Lesson plan

BS 5950

BS 5950 is a withdrawn British Standard for the design, fabrication and erection of structural steelwork. It was written for use in the UK but can be used worldwide. It was superseded by BS EN 1993 and withdrawn on 30 March 2010. It does not apply to bridges, which are covered by BS 5400. BS 5950 replaced BS 449, which used a permissible stress approach, and uses limit state design methods.

Back to article

Article summary

BS 5950 is a withdrawn British Standard for the design, fabrication and erection of structural steelwork. It was written for use in the UK but can be used worldwide. It was superseded by BS EN 1993 and withdrawn on 30 March 2010. It does not apply to bridges, which are covered by BS 5400. BS 5950 replaced BS 449, which used a permissible stress approach, and uses limit state design methods.

Key claims

No claims recorded.

Discussion questions

  1. Summarise the article in your own words. Which single claim would you verify first, and why?
  2. Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
  3. If two sources disagreed about one of these facts, what would you need in order to trust one over the other?

Bibliography

No sources recorded.

Key claims and bibliography are generated from the same tracked claims and sources as the article page.