BSA 28P

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

The BSA Model 28P is an assault rifle of British origin. The weapon was considered to replace the .303 Lee–Enfield after 1945. However, the BSA 28P was outdated compared to its rival, the EM-2 and the L1A1 SLR asides the 7.62 NATO calibre.

The 28P rifle was tested during the summer of 1950 at Enfield but was not particularly accurate. An explosion in the breech showed a fault and although a revised variant subsequently performed well, the project was abandoned. One unit of the Model 28P is present at the Imperial War Museum.

The BSA Model 28P is an assault rifle of British origin. The weapon was considered to replace the .303 Lee–Enfield after 1945. However, the BSA 28P was outdated compared to its rival, the EM-2 and the L1A1 SLR asides the 7.62 NATO calibre.

The 28P rifle was tested during the summer of 1950 at Enfield but was not particularly accurate. An explosion in the breech showed a fault and although a revised variant subsequently performed well, the project was abandoned. One unit of the Model 28P is present at the Imperial War Museum.

Overview

The Model 28P is gas operated, locked placing breech block into the left of the receiver. It has a squared receiver with an integral optical sight and pistol gripped half stock.

The trigger section with a rack and pinion and weight device to slow its rate of fire with its radial lever selector marked A for full auto, R for single shot and S for safety, on the left side of the stock alongside the receiver. Rifling came with 5 grooves right hand. The flash hider came as a grenade launcher and could use a bayonet No5 Pattern.

See also

British military rifles List of assault rifles

Text derived from https://en.wikipedia.org/w/index.php?oldid=1320129820 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.