Buffer solution =============== A buffer solution is a solution whose pH does not change significantly on dilution or if a small amount of strong acid or base is added to it at constant temperature. Buffer capacity is used to measure the resistance to pH change of a buffer solution. Buffer solutions are used to maintain pH at a nearly constant value in a wide variety of chemical applications. In nature, many living systems use buffering to regulate pH. For example, the bicarbonate buffering system serves to regulate the pH of blood, and bicarbonate also acts as a buffer in the ocean. A buffer solution is a solution whose pH does not change significantly on dilution or if a small amount of strong acid or base is added to it at constant temperature. Buffer capacity is used to measure the resistance to pH change of a buffer solution. Buffer solutions are used to maintain pH at a nearly constant value in a wide variety of chemical applications. In nature, many living systems use buffering to regulate pH. For example, the bicarbonate buffering system serves to regulate the pH of blood, and bicarbonate also acts as a buffer in the ocean. Similarly, if strong alkali is added to the mixture, the hydrogen ion concentration decreases by less than the amount expected for the quantity of alkali added. In Figure 1, the effect is illustrated by the simulated titration of a weak acid with pK a  = 4.7. The relative concentration of undissociated acid is shown in blue, and that of its conjugate base in red. The pH changes relatively slowly in the buffer region, pH = pK a  ± 1, centered at pH = 4.7, where [HA] = [A − ]. The hydrogen ion concentration decreases by less than the amount expected because most of the added hydroxide ion is consumed in the reaction and only a little is consumed in the neutralization reaction (which is the reaction that results in an increase in pH) Once the acid is more than 95% deprotonated, the pH rises rapidly because most of the added alkali is consumed in the neutralization reaction. ===Buffer capacity and buffer index=== The buffer capacity ( \beta ) is a measure of the amount (number of moles or gram-equivalents, \Delta n ) of a strong acid or base added to a given volume ( V ) of solution required to change its pH by a given amount ( \Delta pH ). \beta = \frac{\Delta n}{\Delta pH} The buffer capacity ( \beta ) is highest when the addition of a large amount ( \Delta n ) of acid or base to the solution volume produces only a small pH change ( \Delta pH ). Thus buffer capacity and the closely related buffer index are quantitative measures of a buffer solution's resistance to changes in pH in response to changes in acid or alkali concentration. Buffer capacity and buffer index are quasi-synonyms (both are denoted \beta ), but their definitions differ slightly in the extent of pH change they consider. The concept of buffer capacity, how to determine it from acid-base titration measurements, and its mathematical significance in relation to the dissociation constant ( pK_{a} ) of the buffer solution and its behaviour in response to an external perturbation were introduced by the Dutch-American biochemist Donald Dexter Van Slyke in 1922. The buffer index (also \beta ) considers an infinitesimal change in pH (for mathematical calculation purposes), whereas the buffer capacity considers a macroscopic pH change of 1 pH unit (for titration measurements). Thus \beta = \frac{dn}{d(pH)} When taking also into account the volume ( V ) of the titrated buffer solution, its buffer capacity ( \beta ) can be defined in term of concentration changes: \beta = \frac{1}{V} \cdot \frac{\Delta n}{\Delta pH} Where: V: the volume of the buffer solution (1 L) Δn: the quantity (in mol) of added strong acid or base ΔpH: the absolute value of the difference in pH (before and after addition) When considering an infinitesimal variation in concentration dC = \frac {\Delta n} {V} = \frac {\delta n} {V} and an infinitesimal change in pH, d(\mathrm{pH} ), the buffer capacity can be expressed as a buffer index ( \beta ): \beta = \frac{dC_b}{d(\mathrm{pH})}, where dC_b is an infinitesimal change in base concentration in the buffer solution due to the amount of base added, or \beta = -\frac{dC_a}{d(\mathrm{pH})}, where dC_a is an infinitesimal change in acid concentration in the buffer solution due to the amount of acid added. pH is defined as −log 10 [H + ], and d(pH) is an infinitesimal change in pH. With either definition, the buffer capacity for a weak acid HA with dissociation constant K a can be expressed as \beta = 2.303 \left([\ce{H+}] + \frac{T_\ce{HA} K_a[\ce{H+}]}{(K_a + [\ce{H+}])^2} + \frac{K_\text{w}}{[\ce{H+}]}\right), where [H + ] is the concentration of hydrogen ions, and T_\text{HA} is the total concentration of added acid. K w is the equilibrium constant for self-ionization of water, equal to 1.0 . Note that in solution H + exists as the hydronium ion H 3 O + , and further aquation of the hydronium ion has negligible effect on the dissociation equilibrium, except at very high acid concentration. This equation shows that there are three regions of raised buffer capacity (see figure 2). In the central region of the curve (colored green on the plot), the second term is dominant, and \beta \approx 2.303 \frac{T_\ce{HA} K_a[\ce{H+}]}{(K_a + [\ce{H+}])^2}. Buffer capacity rises to a local maximum at pH = pK a . The height of this peak depends on the value of pK a . Buffer capacity is negligible when the concentration [HA] of buffering agent is very small and increases with increasing concentration of the buffering agent. Some authors show only this region in graphs of buffer capacity. Buffer capacity falls to 33% of the maximum value at pH = pK a ± 1, to 10% at pH = pK a ± 1.5 and to 1% at pH = pK a ± 2. For this reason, the most useful range is approximately pK a  ± 1. When choosing a buffer for use at a specific pH, it should have a pK a value as close as possible to that pH. With strongly acidic solutions, pH less than about 2 (coloured red on the plot), the first term in the equation dominates, and buffer capacity rises exponentially with decreasing pH: \beta \approx 10^{-\mathrm{pH}}. This results from the fact that the second and third terms become negligible at very low pH. This term is independent of the presence or absence of a buffering agent. With strongly alkaline solutions, pH more than about 12 (coloured blue on the plot), the third term in the equation dominates, and buffer capacity rises exponentially with increasing pH: \beta \approx 10^{\mathrm{pH} - \mathrm{p}K_\text{w}}. This results from the fact that the first and second terms become negligible at very high pH. This term is also independent of the presence or absence of a buffering agent. === Monoprotic acids=== First write down the equilibrium expression This shows that when the acid dissociates, equal amounts of hydrogen ion and anion are produced. The equilibrium concentrations of these three components can be calculated in an ICE table (ICE standing for "initial, change, equilibrium"). The first row, labelled I, lists the initial conditions: the concentration of acid is C 0 , initially undissociated, so the concentrations of A − and H + would be zero; y is the initial concentration of added strong acid, such as hydrochloric acid. If strong alkali, such as sodium hydroxide, is added, then y will have a negative sign because alkali removes hydrogen ions from the solution. The second row, labelled C for "change", specifies the changes that occur when the acid dissociates. The acid concentration decreases by an amount −x, and the concentrations of A − and H + both increase by an amount +x. This follows from the equilibrium expression. The third row, labelled E for "equilibrium", adds together the first two rows and shows the concentrations at equilibrium. To find x, use the formula for the equilibrium constant in terms of concentrations: K_\text{a} = \frac{[\ce{H+}] [\ce{A-}]}{[\ce{HA}]}. Substitute the concentrations with the values found in the last row of the ICE table: K_\text{a} = \frac{x(x + y)}{C_0 - x}. Simplify to x^2 + (K_\text{a} + y) x - K_\text{a} C_0 = 0. With specific values for C 0 , K a and y, this equation can be solved for x. Assuming that pH = −log 10 [H + ], the pH can be calculated as pH = −log 10 (x + y). ===Polyprotic acids=== calculated for a 10-millimolar solution of citric acid Polyprotic acids are acids that can lose more than one proton. The constant for dissociation of the first proton may be denoted as K a1 , and the constants for dissociation of successive protons as K a2 , etc. Citric acid is an example of a polyprotic acid H 3 A, as it can lose three protons. When the difference between successive pK a values is less than about 3, there is overlap between the pH range of existence of the species in equilibrium. The smaller the difference, the more the overlap. In the case of citric acid, the overlap is extensive and solutions of citric acid are buffered over the whole range of pH 2.5 to 7.5. Calculation of the pH with a polyprotic acid requires a speciation calculation to be performed. In the case of citric acid, this entails the solution of the two equations of mass balance: \begin{align} C_\ce{A} &= [\ce{A^3-}]+ \beta_1 [\ce{A^3-}][\ce{H+}] + \beta_2 [\ce{A^3-}][\ce{H+}]^2 + \beta_3 [\ce{A^3-}][\ce{H+}]^3, \\ C_\ce{H} &= [\ce{H+}] + \beta_1 [\ce{A^3-}][\ce{H+}] + 2\beta_2 [\ce{A^3-}][\ce{H+}]^2 + 3\beta_3 [\ce{A^3-}][\ce{H+}]^3 - K_\text{w}[\ce{H+}]^{-1}. \end{align} C A is the analytical concentration of the acid, C H is the analytical concentration of added hydrogen ions, β q are the cumulative association constants. K w is the constant for self-ionization of water. There are two non-linear simultaneous equations in two unknown quantities [A 3− ] and [H + ]. Many computer programs are available to do this calculation. The speciation diagram for citric acid was produced with the program HySS. N.B. The numbering of cumulative, overall constants is the reverse of the numbering of the stepwise, dissociation constants. Cumulative association constants are used in general-purpose computer programs such as the one used to obtain the speciation diagram above. ===Simple buffering agents=== For buffers in acid regions, the pH may be adjusted to a desired value by adding a strong acid such as hydrochloric acid to the particular buffering agent. For alkaline buffers, a strong base such as sodium hydroxide may be added. Alternatively, a buffer mixture can be made from a mixture of an acid and its conjugate base. For example, an acetate buffer can be made from a mixture of acetic acid and sodium acetate. Similarly, an alkaline buffer can be made from a mixture of the base and its conjugate acid. ==="Universal" buffer mixtures=== By combining substances with pK a values differing by only two or less and adjusting the pH, a wide range of buffers can be obtained. Citric acid is a useful component of a buffer mixture because it has three pK a values, separated by less than two. The buffer range can be extended by adding other buffering agents. The following mixtures (McIlvaine's buffer solutions) have a buffer range of pH 3 to 8. A mixture containing citric acid, monopotassium phosphate, boric acid, and diethyl barbituric acid can be made to cover the pH range 2.6 to 12. Other universal buffers are the Carmody buffer and the Britton–Robinson buffer, developed in 1931. ===Common buffer compounds used in biology=== For effective range see Buffer capacity, above. Also see Good's buffers for the historic design principles and favourable properties of these buffer substances in biochemical applications. REFERENCES ---------- BIBLIOGRAPHY (BibTeX) -------------------- @article{ref0, title = {Buffer solution}, url = {https://encyclopegia.org/a/buffer-solution} } BIBLIOGRAPHY (RIS) ------------------- TY - JOUR TI - Buffer solution UR - https://encyclopegia.org/a/buffer-solution ER - CITE THIS ARTICLE ---------------- Cite this article: Buffer solution Derived from: https://en.wikipedia.org/w/index.php?oldid=1378665756 Licence: CC BY-SA 4.0 Snapshot: enwiki-001378665756 Permalink: /a/buffer-solution