Cable theory
≈ 5 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
In neuroscience, classical cable theory uses mathematical models to calculate the electric current (and accompanying voltage) along passive neurites, particularly the dendrites that receive synaptic inputs at different sites and times. Estimates are made by modeling dendrites and axons as cylinders composed of segments with capacitances c_m and resistances r_m combined in parallel (see Fig. 1). The capacitance of a neuronal fiber comes about because electrostatic forces are acting through the very thin lipid bilayer (see Figure 2). The resistance in series along the fiber r_l is due to the axoplasm's significant resistance to movement of electric charge.
In neuroscience, classical cable theory uses mathematical models to calculate the electric current (and accompanying voltage) along passive neurites, particularly the dendrites that receive synaptic inputs at different sites and times. Estimates are made by modeling dendrites and axons as cylinders composed of segments with capacitances c_m and resistances r_m combined in parallel (see Fig. 1). The capacitance of a neuronal fiber comes about because electrostatic forces are acting through the very thin lipid bilayer (see Figure 2). The resistance in series along the fiber r_l is due to the axoplasm's significant resistance to movement of electric charge. To better understand how the cable equation is derived, first consider an idealized neuron with a perfectly sealed membrane (r m =∞) with no loss of current to the outside, and no capacitance (c m = 0). A current injected into the fiber at position x = 0 would move along the inside of the fiber unchanged. Moving away from the point of injection and by using Ohm's law (V = IR) we can calculate the voltage change as: where the negative is because current flows down the potential gradient. Letting Δx go towards zero and having infinitely small increments of x, one can write ( ) as: or Bringing r m back into the picture is like making holes in a garden hose. The more holes, the faster the water will escape from the hose, and the less water will travel all the way from the beginning of the hose to the end. Similarly, in an axon, some of the current traveling longitudinally through the axoplasm will escape through the membrane. If i m is the current escaping through the membrane per length unit, m, then the total current escaping along y units must be y·i m . Thus, the change of current in the axoplasm, Δi l , at distance, Δx, from position x=0 can be written as: or, using continuous, infinitesimally small increments: i_m can be expressed with yet another formula, by including the capacitance. The capacitance will cause a flow of charge (a current) towards the membrane on the side of the cytoplasm. This current is usually referred to as displacement current (here denoted i_c .) The flow will only take place as long as the membrane's storage capacity has not been reached. i_c can then be expressed as: where c_m is the membrane's capacitance and {\partial V}/{\partial t} is the change in voltage over time. The current that passes the membrane ( i_r ) can be expressed as: and because i_m = i_r + i_c the following equation for i_m can be derived if no additional current is added from an electrode: where {\partial i_l}/{\partial x} represents the change per unit length of the longitudinal current. Combining equations ( ) and ( ) gives a first version of a cable equation: which is a second-order partial differential equation (PDE). By a simple rearrangement of equation ( ) (see later) it is possible to make two important terms appear, namely the length constant (sometimes referred to as the space constant) denoted \lambda and the time constant denoted \tau . The following sections focus on these terms. {{NumBlk|:| V_x = V_0 e^{-\frac{x}{\lambda}} | }} Where V_0 is the depolarization at x=0 (point of current injection), e is the exponential constant (approximate value 2.71828) and V_x is the voltage at a given distance x from x=0. When x=\lambda then and which means that when we measure V at distance \lambda from x=0 we get Thus V_\lambda is always 36.8 percent of V_0 . and recognize \lambda^2 = {r_m}/{r_l} on the left side and \tau = c_m r_m on the right side. The cable equation can now be written in its perhaps best known form: This is a 1D heat equation or diffusion equation for which many solution methods, such as Green's functions and Fourier methods, have been developed. It is also a special degenerate case of the Telegrapher's equation, where the inductance L vanishes and the signal propagation speed 1/\sqrt{LC} is infinite.
Text derived from https://en.wikipedia.org/w/index.php?oldid=1316183741 under CC BY-SA 4.0; modifications have been made.