Lesson plan
CALDIC
CALDIC (the California Digital Computer) is an electronic digital computer that was built at the University of California, Berkeley, with the assistance of the Office of Naval Research, between 1951 and 1955. It was to assist and enhance research being conducted at the university with a platform for high-speed computing. CALDIC was designed to be constructed at a low cost and simple to operate, by standards of the time. Input and output was via paper tape, which could be created or displayed using a teletype. It was a serial decimal machine with an , 10,000-word magnetic drum memory. (As CALDIC's decimal words were 10 digits each, the magnetic memory could store about 400,000 bits.) It contained 1,300 vacuum tubes, 1,000 crystal diodes, 100 magnetic elements (for the recording heads), and 12 relays (in the power supply). It weighed about . It was capable of speeds of 50 iterations per second. CALDIC was a stored program computer with a six-digit instruction format (two digits for the opcode and four digits for the memory address). The computer was initially planned by Paul Morton, Leland Cunningham, and Dick Lehmer; the latter two had been involved with the ENIAC at the University of Pennsylvania, and Lehmer had given one of the Moore School Lectures.…
Article summary
CALDIC (the California Digital Computer) is an electronic digital computer that was built at the University of California, Berkeley, with the assistance of the Office of Naval Research, between 1951 and 1955. It was to assist and enhance research being conducted at the university with a platform for high-speed computing. CALDIC was designed to be constructed at a low cost and simple to operate, by standards of the time. Input and output was via paper tape, which could be created or displayed using a teletype. It was a serial decimal machine with an , 10,000-word magnetic drum memory. (As CALDIC's decimal words were 10 digits each, the magnetic memory could store about 400,000 bits.) It contained 1,300 vacuum tubes, 1,000 crystal diodes, 100 magnetic elements (for the recording heads), and 12 relays (in the power supply). It weighed about . It was capable of speeds of 50 iterations per second. CALDIC was a stored program computer with a six-digit instruction format (two digits for the opcode and four digits for the memory address). The computer was initially planned by Paul Morton, Leland Cunningham, and Dick Lehmer; the latter two had been involved with the ENIAC at the University of Pennsylvania, and Lehmer had given one of the Moore School Lectures.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.