Caldie

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Caldie is a chromium-molybdenum-vanadium alloyed tool steel manufactured by Uddeholms AB. It is intended for cold work processes, such as blanking and piercing, applied to difficult materials such as advanced high strength steel, where compressive strength and chipping and cracking resistance are important.

Caldie is a chromium-molybdenum-vanadium alloyed tool steel manufactured by Uddeholms AB. It is intended for cold work processes, such as blanking and piercing, applied to difficult materials such as advanced high strength steel, where compressive strength and chipping and cracking resistance are important.

Composition

The steel's composition is

Properties

Uddeholm Caldie is characterized by: Very good chipping and cracking resistance Good wear resistance High hardness (>60 HRC) after high temperature tempering Good dimensional stability in heat treatment and in service Excellent through-hardening properties Good machinability and grindability Excellent polishability Good surface treatment properties Good resistance to tempering back Very good WEDM properties

Application areas

Uddeholm Caldie is suitable for short to medium run tooling where chipping and/or cracking are the predominant failure mechanisms and where a high compressive strength (hardness of over 60 HRC) is necessary. This makes Uddeholm Caldie very suitable for severe cold work applications where the combination of a hardness above 60 HRC and a high cracking resistance is of utmost importance e.g. as in the blanking and forming of ultra high strength steel sheets.

Uddeholm Caldie is also very suitable as a substrate steel for applications where surface coatings are desirable or necessary. Blanking applications where high ductility and toughness are needed to prevent chipping/cracking Cold forging and forming operations where a high compressive strength combined with good resistance to chipping/cracking are necessary Machine knives Thread rolling dies Substrate for surface coatings This steel can be used in engineering applications where high compressive strength has to be combined with high ductility/toughness.

Knives for fragmentation of plastics and metals and roll forming rolls are good examples

See also

Other Uddeholm Cold Work Steels: Arne, Calmax, Rigor, Sleipner, Sverker 3, Sverker 21, Unimax, Vanadis 4 Extra, Vanadis 6, Vanadis 10, Vanadis 23, Vancron 40, UHB 11, Formax, Holdax,

Text derived from https://en.wikipedia.org/w/index.php?oldid=1238242446 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001238242446 · captured 1722627376.0 · version history

Cite this page as: encyclopegia.org, “Caldie”, snapshot enwiki-001238242446. https://encyclopegia.org/a/caldie

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.