Lesson plan
Calma
Calma Company, based in Sunnyvale, California, was, between 1965 and 1988, a vendor of digitizers and minicomputer-based graphics systems targeted at the cartographic and electronic, mechanical and architectural design markets. In the electronic area, the company's best known products were GDS (an abbreviation for "Graphic Design System" ), introduced in 1971, and GDS II, introduced in 1978. By the end of the 1970s, Calma systems were installed in virtually every major semiconductor manufacturing company. The external format of the GDS II database, known as GDS II Stream Format, became a de facto standard for the interchange of IC mask information. The use of this format persisted into the 21st century, long after the demise of the GDS II computer system. In the integrated circuit industry jargon of 2008, "GDS II" referred no longer to the computer system, but to the format itself. Vendors of electronic design automation software often use the phrase "from RTL to GDSII" to imply that their system will take users from a high-level logic design to a completed integrated circuit layout ready for delivery to the mask vendor. In the mechanical area, the DDM (for "Design Drafting and Manufacturing") product was introduced in 1977. It was later extended, under the name "Dimension III", to address the architecture, engineering and construction (AEC) market.…
Article summary
Calma Company, based in Sunnyvale, California, was, between 1965 and 1988, a vendor of digitizers and minicomputer-based graphics systems targeted at the cartographic and electronic, mechanical and architectural design markets. In the electronic area, the company's best known products were GDS (an abbreviation for "Graphic Design System" ), introduced in 1971, and GDS II, introduced in 1978. By the end of the 1970s, Calma systems were installed in virtually every major semiconductor manufacturing company. The external format of the GDS II database, known as GDS II Stream Format, became a de facto standard for the interchange of IC mask information. The use of this format persisted into the 21st century, long after the demise of the GDS II computer system. In the integrated circuit industry jargon of 2008, "GDS II" referred no longer to the computer system, but to the format itself. Vendors of electronic design automation software often use the phrase "from RTL to GDSII" to imply that their system will take users from a high-level logic design to a completed integrated circuit layout ready for delivery to the mask vendor. In the mechanical area, the DDM (for "Design Drafting and Manufacturing") product was introduced in 1977. It was later extended, under the name "Dimension III", to address the architecture, engineering and construction (AEC) market.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.