Camber angle

Uses your system voice; voice and rate in settings.

Snapshot

≈ 4 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

MX1 Camber Car has a large negative camber Camber angle is one of the angles made by the wheels of a vehicle. It is specifically the angle between the vertical axis of a wheel and the vertical axis of the vehicle when viewed from the front or rear. It is used in the creation of steering and suspension. If the top of the wheel is further out than the bottom (that is, tilted away from the axle), it is called positive camber; if the bottom of the wheel is further out than the top, it is called negative camber.

MX1 Camber Car has a large negative camber Camber angle is one of the angles made by the wheels of a vehicle. It is specifically the angle between the vertical axis of a wheel and the vertical axis of the vehicle when viewed from the front or rear. It is used in the creation of steering and suspension. If the top of the wheel is further out than the bottom (that is, tilted away from the axle), it is called positive camber; if the bottom of the wheel is further out than the top, it is called negative camber.

Adjustability

In cars with double wishbone suspensions, camber angle may be fixed or adjustable, but in MacPherson strut suspensions, it is normally fixed. The elimination of an available camber adjustment may reduce maintenance requirements, but if the car is lowered by use of shortened springs, the camber angle will change. Excessive camber angle can lead to increased tire wear and impaired handling. Significant suspension modifications may correspondingly require that the upper control arm or strut mounting points be altered to allow for some inward or outward movement, relative to the longitudinal centerline of the vehicle, for camber adjustment. With aftermarket plates containing slots for strut mounts instead of holes, this lets the entire shock absorber move back and forth, allowing for fine-tuning the camber of a vehicle. These plates are available for most of the commonly modified models of cars. Some aftermarket coilovers come with built-in camber plates already in place, and there are certain other aftermarket solutions which allow the modification of the camber angle of the wheels. Camber bolts with eccentrics allow adjustable camber on some vehicles. These bolts feature large washers that are either eccentric or offset. If the initial-equipment bolts are replaced with eccentric ones, then the adjustment will engender a change of up to two degrees. Control arms (or A-arms) with adjustable ball joints represent another avenue for allowing side-by-side adjustability. With these control arms installed, tire camber can effectively be changed by simply moving the tires. After that, one tightens the bolts in order to lock the ball joint in the desired position. Another aftermarket solution for changing the camber angle is via control rods of adjustable length. However, this solution is only amenable to vehicles that employ control rods, not A-arms. Since control rods are responsible for locating the suspension points and keeping them in place, changing the overall length of the rods influences the camber angle.

See also

Camber thrust Caster angle Kingpin (automotive part) Toe (automotive) Vehicle dynamics

References

External links

Camber and Race Car Suspension Tuning Hagerman, John. "Camber, Caster, Toe: What Do They Mean?" ( ). Smithees Race Car Technologies. Reprinted from Grassroots Motorsports magazine. "Suspension 101: Camber, Caster, and Toe". Come And Drive It. Retrieved March 27, 2024. Lewis, R. (6 August 2014). "Culture: Stance, Fitment & USDM Car Scene". The Lowdown. Retrieved September 21, 2022. Sabella, M. D. I. (1 December 2007). "Camber 101 - December 2007 Wrenchin . MotorTrend. Retrieved September 21, 2022.

Text derived from https://en.wikipedia.org/w/index.php?oldid=1370055441 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.