Lesson plan
Can4linux
can4linux is an open-source CAN Linux-Kernel device driver. Development started in the mid-1990s for the Philips 82C200 CAN controller stand alone chip on an ISA Board AT-CAN-MINI. In 1995 the first version was created to use the CAN bus with Linux for laboratory automation as a project of the Linux Lab Project at FU Berlin. The increasing spread of the CAN field bus technology for automation especially in embedded devices and the growth of Linux in this area leads to a growing importance of device drivers as base for higher layer CAN protocols like CANopen, J1939 and DeviceNet. Besides the NXP SJA1000 as successor of the first supported CAN controller Philips 82C200 and the Intel 82527, the development for powerful microcontrollers with integrated CAN controllers that are capable to run the Linux Operating system have been intensified since 2005. As examples for this development serve Freescale's ColdFire processors or ARM models by ATMEL and Freescale but also the stand-alone CAN controller MCP2515, connected via SPI Bus. A list of supported CAN controllers is available on the can4linux project site. In the latest version there is a virtual CAN mode implemented which allows applications to communicate without CAN hardware but only by using the device driver software layer.…
Article summary
can4linux is an open-source CAN Linux-Kernel device driver. Development started in the mid-1990s for the Philips 82C200 CAN controller stand alone chip on an ISA Board AT-CAN-MINI. In 1995 the first version was created to use the CAN bus with Linux for laboratory automation as a project of the Linux Lab Project at FU Berlin. The increasing spread of the CAN field bus technology for automation especially in embedded devices and the growth of Linux in this area leads to a growing importance of device drivers as base for higher layer CAN protocols like CANopen, J1939 and DeviceNet. Besides the NXP SJA1000 as successor of the first supported CAN controller Philips 82C200 and the Intel 82527, the development for powerful microcontrollers with integrated CAN controllers that are capable to run the Linux Operating system have been intensified since 2005. As examples for this development serve Freescale's ColdFire processors or ARM models by ATMEL and Freescale but also the stand-alone CAN controller MCP2515, connected via SPI Bus. A list of supported CAN controllers is available on the can4linux project site. In the latest version there is a virtual CAN mode implemented which allows applications to communicate without CAN hardware but only by using the device driver software layer.…
Key claims
No claims recorded.
Discussion questions
- Summarise the article in your own words. Which single claim would you verify first, and why?
- Which claim in this article is most likely to be revised as the sources update? How would you check its current status?
- If two sources disagreed about one of these facts, what would you need in order to trust one over the other?
Bibliography
No sources recorded.
Key claims and bibliography are generated from the same tracked claims and sources as the article page.