Canning Dam
The Canning Dam is a gravity dam across the Canning River, located near Ashendon, in the City of Armadale, Western Australia.
≈ 6 min read
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
The Canning Dam is a gravity dam across the Canning River, located near Ashendon, in the City of Armadale, Western Australia. Completed in 1940, the dam created the Canning Reservoir that serves as a major source of potable water for the city of Perth, Western Australia. The dam's catchment area is dean from the Darling Scarp.
It is noted for its innovative structural and hydraulic design that was considered to be at the forefront of concrete gravity dam design at the time of construction in from 1933 to its completion. The Canning Dam was Perth's primary water supply up until the 1961 when other sources of fresh water were tapped, such as the Serpentine dam.
Currently the dam supplies approximately 20 percent of Perth's fresh water. Inflow into the Canning Reservoir is estimated to be and, when full, the reservoir has a storage capacity of .
Since its completion in 1940, the Canning Dam has contributed to a wide range of environmental and ecological problems in surrounding regions, problems include more common algal blooms, habitat loss and sedimentation. Despite these issues, Canning Dam and the adjacent parks and forests provide a variety of recreational activities for the public such as bushwalking, historic walks and picnic facilities.
The Canning Dam is a gravity dam across the Canning River, located near Ashendon, in the City of Armadale, Western Australia. Completed in 1940, the dam created the Canning Reservoir that serves as a major source of potable water for the city of Perth, Western Australia. The dam's catchment area is dean from the Darling Scarp.
It is noted for its innovative structural and hydraulic design that was considered to be at the forefront of concrete gravity dam design at the time of construction in from 1933 to its completion. The Canning Dam was Perth's primary water supply up until the 1961 when other sources of fresh water were tapped, such as the Serpentine dam.
Currently the dam supplies approximately 20 percent of Perth's fresh water. Inflow into the Canning Reservoir is estimated to be and, when full, the reservoir has a storage capacity of .
Since its completion in 1940, the Canning Dam has contributed to a wide range of environmental and ecological problems in surrounding regions, problems include more common algal blooms, habitat loss and sedimentation. Despite these issues, Canning Dam and the adjacent parks and forests provide a variety of recreational activities for the public such as bushwalking, historic walks and picnic facilities.
Hydrology
The Canning Dam catchment lies within the Darling Scarp which forms part of an Archaean Shield composed largely of granite with some invaded linear belts of metamorphosed sedimentary and volcanic rocks. The dam wall is situated in a narrow gorge running east and west, with rock sides sloping upward from the river bed.
Behind the dam wall, the south branch of the Canning River joins the main stream, with the impounded water forming a lake which stretches back in three major arms to the east south-east and south. The catchment area is . The reservoir is at and the highest point of the catchment, Mount Cooke is at AHD.
Climatically, the area receives about of rainfall per annum with most of this falling between May and September. There is a large variability of rainfall across the catchment however, from between .
Since 1975 long-term average rainfalls at the dam wall have decreased by 20 percent and streamflow into the catchment by approximately 60 percent—the average annual inflow between 1948 and 1974 was which reduced to between 1975 and 2004.
Remedial works
In , it was reported that the Canning Dam was subjected to considerable cracking of the upper parts of the dam and upper gallery. Investigations have shown that cracking was due to strong alkali aggregate reactivity (AAR) in the concrete. AAR results in swelling of the concrete, which may cause secondary compressive stresses, localised map cracks, and, ultimately structural cracks.
In addition, the concrete tensile strength and elasticity significantly decreases. Many old concrete dams are known to suffer from AAR, including Fontana Dam in Tennessee and Pian Telessio dam in Italy. Extensive remedial works were undertaken between 1999 and 2001 to strengthen the dam wall.
This work involved removing the top of the existing dam wall and drilling/blasting through the dam wall plus up to a further into the bedrock below. The top section of the wall was then rebuilt using reinforced concrete. Finally, permanent, re-stressable ground anchors were installed through the formed and drilled holes from the crest to be stressed and grouted into the foundation rock.
At time of completion, these were the largest capacity and longest permanent ground anchors installed in the world. An innovative drilling and blasting technique called penetrating cone fracture (PCF) was used in the remedial works process.
PCF was chosen over conventional drilling and/or blasting techniques due to the reduced risk of damage to the existing structure from vibration, as well as lower noxious fume and dust levels.
Gallery
Canning Dam, Perth (1).jpg|Dam wall and slip-way Canning Dam panorama.jpg|Spillway Canning Dam, Perth (4).jpg|Spillway, reservoir side Canning dam panorama 4.jpg|Panorama Canningdam plaque.jpg|Commemorative plaque Canningdam panorama1.jpg|Canning Dam wall, from the top of the walkway Canningdam panorama2.jpg|Canning Dam catchment, reservoir side Canningdam spillway.jpg|View of the dam including the spillway
See also
List of reservoirs and dams in Western Australia Swan River
Text derived from https://en.wikipedia.org/w/index.php?oldid=1362064474 under CC BY-SA 4.0; modifications have been made.