CCIR System G

CCIR System G, also known as the "Gerber Standard", is an analog broadcast television system used in sixty countries around the world for UHF channels.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

CCIR System G, also known as the "Gerber Standard", is an analog broadcast television system used in sixty countries around the world for UHF channels. System G is generally associated with System B for VHF.

At a CCIR Geneva meeting in July 1950, Dr. Gerber (a Swiss engineer), proposed a modified 625-lines system with a 7 MHz channel bandwidth (based on work by Telefunken and Walter Bruch). Known as the "Gerber Standard", it was initially approved for VHF broadcasts, and eventually adapted for UHF. Usually paired with PAL colour, it was also used with SECAM in Egypt, Iran, and Saudi Arabia.

CCIR System G, also known as the "Gerber Standard", is an analog broadcast television system used in sixty countries around the world for UHF channels. System G is generally associated with System B for VHF.

At a CCIR Geneva meeting in July 1950, Dr. Gerber (a Swiss engineer), proposed a modified 625-lines system with a 7 MHz channel bandwidth (based on work by Telefunken and Walter Bruch). Known as the "Gerber Standard", it was initially approved for VHF broadcasts, and eventually adapted for UHF. Usually paired with PAL colour, it was also used with SECAM in Egypt, Iran, and Saudi Arabia.

A frame is the total picture. The frame rate is the number of pictures displayed in one second. But each frame is actually scanned twice interleaving odd and even lines.

Each scan is known as a field (odd and even fields.) So field rate is twice the frame rate. In each frame there are 625 lines (or 312.5 lines in a field.)

So line rate (line frequency) is 625 times the frame frequency or 625×25=15625 Hz. The RF parameters of the transmitted signal are exactly the same as those for System B which is used on the 7.0 MHz wide channels of the VHF bands.

The only difference is the width of the guard band between the channels, which on System G is 1.0 MHz wider than for System B: in other words 1.15 MHz (assuming the worst case which is when NICAM sound is in use).

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373210947 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

5 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.