CEA-936-A

CEA-936-A (USB Carkit Specification) is a Consumer Electronics Association (CEA) standard to allow the use of a mini or micro USB connector for UART and analog audio signals.

Uses your system voice; voice and rate in settings.

Snapshot

≈ 2 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

CEA-936-A (USB Carkit Specification) is a Consumer Electronics Association (CEA) standard to allow the use of a mini or micro USB connector for UART and analog audio signals. It is intended to allow connection of a mobile phone to analog hands-free car kits, chargers, and other RS-232 devices. It does not comply with the USB specification.

From the mobile phone side, the USB D− wire is used as either the USB D− signal, the UART Transmit data signal, the left stereo speaker audio channel, or the mono speaker audio channel, and the USB D+ wire is used as either the USB D+ signal, the UART Receive data signal, the right stereo speaker audio channel, or the mono microphone audio channel. The carkit specification also finds optional support in ULPI specification for off chip USB Physical layer ICs.

Standard Details - CEA-936-A ISP1707a1; Universal Serial Bus transceiver

Text derived from https://en.wikipedia.org/w/index.php?oldid=1301275083 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

No external citation was extracted for this revision. That is a statement about the source, not a claim that none exists.