Ceiling temperature

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

Ceiling temperature ( T_c ) is a measure of the tendency of a polymer to revert to its constituent monomers. When a polymer is at its ceiling temperature, the rate of polymerization and depolymerization of the polymer are equal. Generally, the ceiling temperature of a given polymer is correlated to the steric hindrance of the polymer’s monomers. Polymers with high ceiling temperatures are often commercially useful. Polymers with low ceiling temperatures are more readily depolymerizable.

Ceiling temperature ( T_c ) is a measure of the tendency of a polymer to revert to its constituent monomers. When a polymer is at its ceiling temperature, the rate of polymerization and depolymerization of the polymer are equal. Generally, the ceiling temperature of a given polymer is correlated to the steric hindrance of the polymer’s monomers. Polymers with high ceiling temperatures are often commercially useful. Polymers with low ceiling temperatures are more readily depolymerizable.

Thermodynamics of polymerization

At a given temperature, the reversibility of polymerization can be determined using the Gibbs free energy equation: \Delta G_p = \Delta H_p - T \Delta S_p where \Delta S_p is the change of entropy during polymerization. The change of enthalpy during polymerization, \Delta H_p , is also known as the heat of polymerization, which is defined by \Delta H_p = E_p - E_{dp} where E_p and E_{dp} denote the activation energies for polymerization and depolymerization, respectively, on the assumption that depolymerization occurs by the reverse mechanism of polymerization. Entropy is the measure of randomness or chaos. A system has a lower entropy when there are few objects in the system and has a higher entropy when there are many objects in the system. Because the process of depolymerization involves a polymer being broken down into its monomers, depolymerization increases entropy. In the Gibbs free energy equation, the entropy term is negative. It is enthalpy that drives polymerizations. At low temperatures, the enthalpy term is greater than the T\Delta S_p term, which allows polymerization to occur. At the ceiling temperature, the enthalpy term and the entropy term are equal, so that the rates of polymerization and depolymerization become equal and the net polymerization rate becomes zero. Above the ceiling temperature, the rate of depolymerization is greater than the rate of polymerization, which prevents the formation of the polymer. Since : \Delta H_p and \Delta S_p are fairly constant with temperature change, the ceiling temperature can be defined by T_c = \frac{\Delta H_p}{\Delta S_p}

Monomer-polymer equilibrium

This phenomenon was first described by Snow and Frey in 1943. The thermodynamic explanation is due to Frederick Dainton and K. J. Ivin, who proposed that the chain propagation step of the polymerization is reversible. At the ceiling temperature, there will always be excess monomers in the polymer due to the equilibrium between polymerization and depolymerization. Polymers derived from simple vinyl monomers have such high ceiling temperatures that only a small amount of monomers remain in the polymer at ordinary temperatures. The situation for α-methylstyrene, PhC(Me)=CH 2 , is an exception to this trend. Its ceiling temperature is around 66 °C. Steric hindrance is significant in polymers derived from α-methylstyrene because the phenyl and methyl groups are bonded to the same carbon. These steric effects in combination with stability of the tertiary benzylic α-methylstyryl radical give α-methylstyrene its relatively low ceiling temperature. When a polymer has a very high ceiling temperature, it degrades via bond cleavage reactions instead of depolymerization. A similar effect explains the relatively low ceiling temperature for polyisobutylene.

Ceiling temperatures of common monomers

References

Text derived from https://en.wikipedia.org/w/index.php?oldid=1292151710 under CC BY-SA 4.0; modifications have been made.

Provenance

snapshot enwiki-001292151710 · captured 1748171834.0 · version history

Cite this page as: encyclopegia.org, “Ceiling temperature”, snapshot enwiki-001292151710. https://encyclopegia.org/a/ceiling-temperature

Sources cited in this revision

3 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.