Central composite design

In statistics, a central composite design is an experimental design, useful in response surface methodology, for building a second order (quadratic) model for the response variable without needing to use a complete three-level factorial…

Uses your system voice; voice and rate in settings.

Snapshot

≈ 3 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In statistics, a central composite design is an experimental design, useful in response surface methodology, for building a second order (quadratic) model for the response variable without needing to use a complete three-level factorial experiment. After the designed experiment is performed, linear regression is used, sometimes iteratively, to obtain results. Coded variables are often used when constructing this design.

Implementation

The design consists of three distinct sets of experimental runs: A factorial (perhaps fractional) design in the factors studied, each having two levels; A set of center points, experimental runs whose values of each factor are the medians of the values used in the factorial portion. This point is often replicated in order to improve the precision of the experiment; A set of axial points, experimental runs identical to the centre points except for one factor, which will take on values both below and above the median of the two factorial levels, and typically both outside their range.

All factors are varied in this way. \mathbf E = \begin{bmatrix} \alpha & 0 & 0 & \cdots & \cdots & \cdots & 0 \\ { - \alpha } & 0 & 0 & \cdots & \cdots & \cdots & 0 \\ 0 & \alpha & 0 & \cdots & \cdots & \cdots & 0 \\ 0 & { - \alpha } & 0 & \cdots & \cdots & \cdots & 0 \\ \vdots & {} & {} & {} & {} & {} & \vdots \\ 0 & 0 & 0 & 0 & \cdots & \cdots & \alpha \\ 0 & 0 & 0 & 0 & \cdots & \cdots & { - \alpha } \\ \end{bmatrix}. Then d is the vertical concatenation: \mathbf d = \begin{bmatrix} \mathbf F \\ \mathbf C \\ \mathbf E \end{bmatrix}.

The design matrix X used in linear regression is the horizontal concatenation of a column of 1s (intercept), d, and all elementwise products of a pair of columns of d: \mathbf X = \begin{bmatrix} \mathbf 1 & \mathbf d & \mathbf d(1)\times\mathbf d(2) & \mathbf d(1)\times\mathbf d(3) & \cdots & \mathbf d(k-1)\times\mathbf d(k) & \mathbf d(1)^2 &\mathbf d(2)^2 &\cdots & \mathbf d(k)^2 \end{bmatrix}, where d(i) represents the ith column in d. There are many different methods to select a useful value of α. Let F be the number of points due to the factorial design and T = 2k + n, the number of additional points, where n is the number of central points in the design.

Common values are as follows (Myers, 1971): Orthogonal design:: \alpha = (Q\times F/4)^{1/4}\,\! , where Q = (\sqrt{F + T} -\sqrt{F})^2 ; Rotatable design: α = F 1/4 (the design implemented by MATLAB’s ccdesign function).

References

Myers, Raymond H. Response Surface Methodology. Boston: Allyn and Bacon, Inc., 1971

Text derived from https://en.wikipedia.org/w/index.php?oldid=1369846765 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

1 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.