Centrifuge
are placed in these slots and the motor is spun.
≈ 4 min read
Centrifuge. encyclopegia.org, snapshot enwiki-001377616685. /a/centrifuge
Names in other languages
No names in other languages are held for this entry yet.
Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.
are placed in these slots and the motor is spun. As the centrifugal force is in the horizontal plane and the tubes are fixed at an angle, the particles have to travel only a short distance before they hit the wall of the tube and then slide down to the bottom. These angle rotors are very popular in the lab for routine use.
A centrifuge is a device that uses centrifugal force to subject a specimen to a specified constant force – for example, to separate various components of a fluid. This is achieved by spinning the fluid at high speed within a container, thereby separating fluids of different densities (e.g., cream from milk) or liquids from solids.
It works by causing denser substances and particles to move outward in the radial direction. At the same time, objects that are less dense are displaced and moved to the centre. In a laboratory centrifuge that uses sample tubes, the radial acceleration causes denser particles to settle to the bottom of the tube, while low-density substances rise to the top.
A centrifuge can be a very effective filter that separates contaminants from the main body of fluid. Industrial scale centrifuges are commonly used in manufacturing and waste processing to sediment suspended solids, or to separate immiscible liquids. An example is the cream separator found in dairies.
Very high speed centrifuges and ultracentrifuges able to provide very high accelerations can separate fine particles down to the nano-scale, and molecules of different masses. Large centrifuges are used to simulate high gravity or acceleration environments (for example, high-G training for test pilots).
Medium-sized centrifuges are used in washing machines and at some swimming pools to draw water out of fabrics. Gas centrifuges are used for isotope separation, such as to enrich nuclear fuel for fissile isotopes.
Geotechnical centrifuge modeling
Geotechnical centrifuge modeling is used for physical testing of models involving soils. Centrifuge acceleration is applied to scale models to scale the gravitational acceleration and enable prototype scale stresses to be obtained in scale models. Problems such as building and bridge foundations, earth dams, tunnels, and slope stability, including effects such as blast loading and earthquake shaking.
Synthesis of materials
High gravity conditions generated by centrifuge are applied in the chemical industry, casting, and material synthesis. The convection and mass transfer are greatly affected by the gravitational condition.
Researchers reported that the high-gravity level can effectively affect the phase composition and morphology of the products. \text{RCF} = \frac{r \omega^2}{g} where \textstyle g is earth's gravitational acceleration, \textstyle r is the rotational radius, \omega is the angular velocity in radians per unit time This relationship may be written as \text{RCF} = \frac{10^{-3} r_\text{mm} \, \left(\frac{2 \pi N_\text{RPM}}{60}\right)^2}{g} or \text{RCF} = 1.118(2)\, \times 10^{-6}\, r_\text{mm} \, N_\text{RPM}^2 where \textstyle r_\text{mm} is the rotational radius measured in millimeters (mm), and \textstyle N_\text{RPM} is rotational speed measured in revolutions per minute (RPM). To avoid having to perform a mathematical calculation every time, one can find nomograms for converting RCF to rpm for a rotor of a given radius.
A ruler or other straight edge lined up with the radius on one scale, and the desired RCF on another scale, will point at the correct rpm on the third scale. Based on automatic rotor recognition, modern centrifuges have a button for automatic conversion from RCF to rpm and vice versa.
Further reading
Naesgaard et al., Modeling flow liquefaction, its mitigation, and comparison with centrifuge tests Selection of historical centrifuges in the Virtual Laboratory of the Max Planck Institute for the History of Science
Text derived from https://en.wikipedia.org/w/index.php?oldid=1377616685 under CC BY-SA 4.0; modifications have been made.