Centroid

Uses your system voice; voice and rate in settings.

Snapshot

≈ 10 min read

Names in other languages

No names in other languages are held for this entry yet.

Article bodies are English and are not machine-translated. A name in another language is not a translation of the article.

In mathematics and physics, the centroid, also known as geometric center or center of figure, of a plane figure or solid figure is the mean position of all the points in the figure. The same definition extends to any object in n -dimensional Euclidean space. In geometry, one often assumes uniform mass density, in which case the barycenter or center of mass coincides with the centroid. Informally, it can be understood as the point at which a cutout of the shape (with uniformly distributed mass) could be perfectly balanced on the tip of a pin. In physics, if variations in gravity are considered, then a center of gravity can be defined as the weighted mean of all points weighted by their specific weight. In geography, the centroid of a radial projection of a region of the Earth's surface to sea level is the region's geographical center.

In mathematics and physics, the centroid, also known as geometric center or center of figure, of a plane figure or solid figure is the mean position of all the points in the figure. The same definition extends to any object in n -dimensional Euclidean space. In geometry, one often assumes uniform mass density, in which case the barycenter or center of mass coincides with the centroid. Informally, it can be understood as the point at which a cutout of the shape (with uniformly distributed mass) could be perfectly balanced on the tip of a pin. In physics, if variations in gravity are considered, then a center of gravity can be defined as the weighted mean of all points weighted by their specific weight. In geography, the centroid of a radial projection of a region of the Earth's surface to sea level is the region's geographical center.

Determination

\mathbf{C} = \frac{\mathbf{x}_1 + \mathbf{x}_2 + \cdots + \mathbf{x}_k}{k} . This point minimizes the sum of squared Euclidean distances between itself and each point in the set. C_x = \frac{\sum_i {C_i}_x A_i}{\sum_i A_i}, \quad C_y = \frac{\sum_i {C_i}_y A_i}{\sum_i A_i}. Holes in the figure X, overlaps between the parts, or parts that extend outside the figure can all be handled using negative areas A_i. Namely, the measures A_i should be taken with positive and negative signs in such a way that the sum of the signs of A_i for all parts that enclose a given point p is 1 if p belongs to X, and 0 otherwise. For example, the figure below (a) is easily divided into a square and a triangle, both with positive area; and a circular hole, with negative area (b). The centroid of each part can be found in any list of centroids of simple shapes (c). Then the centroid of the figure is the weighted average of the three points. The horizontal position of the centroid, from the left edge of the figure is x = \frac{5 \times 10^2 + 13.33 \times \frac{1}{2}10^2 - 3 \times \pi(2.5)^2}{10^2 + \frac{1}{2}10^2 -\pi(2.5)^2} \approx 8.5 \text{ units}. The vertical position of the centroid is found in the same way. The same formula holds for any three-dimensional objects, except that each A_i should be the volume of X_i, rather than its area. It also holds for any subset of \R^d, for any dimension d, with the areas replaced by the d -dimensional measures of the parts. C = \frac{\int x g(x) \ dx}{\int g(x) \ dx} = \frac{\int_X x \ dx}{\int_X dx} where the integrals are taken over the whole space \R^n, and g is the characteristic function of the subset X of \R^n \! : \ g(x) = 1 if x \in X and g(x) = 0 otherwise. Note that the denominator is simply the measure of the set X. This formula cannot be applied if the set X has zero measure, or if either integral diverges. Alternatively, the coordinate-wise formula for the centroid is defined as C_k = \frac{\int z S_k(z) \ dz}{\int g(x) \ dx}, where C_k is the k th coordinate of C, and S_k(z) is the measure of the intersection of X with the hyperplane defined by the equation x_k = z. Again, the denominator is simply the measure of X. For a plane figure, in particular, the barycentric coordinates are C_{\mathrm x} = \frac{\int x S_{\mathrm y}(x) \ dx}{A}, \quad C_{\mathrm y} = \frac{\int y S_{\mathrm x}(y) \ dy}{A}, where A is the area of the figure X, S_{\mathrm y}(x) is the length of the intersection of X with the vertical line at abscissa x, and S_{\mathrm x}(y) is the length of the intersection of X with the horizontal line at ordinate y. \begin{align} \bar{x} &= \frac{1}{A}\int_a^b x\bigl(f(x) - g(x)\bigr)\,dx, \\[5mu] \bar{y} &= \frac{1}{A}\int_a^b \tfrac12\bigl(f(x) + g(x)\bigr)\bigl(f(x) - g(x)\bigr)\,dx, \end{align} where A is the area of the region (given by \int_a^b \bigl(f(x) - g(x)\bigr) dx ). The centroid of a triangle is the point of intersection of its medians (the lines joining each vertex with the midpoint of the opposite side). The centroid divides each of the medians in the ratio 2:1, which is to say it is located \tfrac13 of the distance from each side to the opposite vertex (see figures at right). Its Cartesian coordinates are the means of the coordinates of the three vertices. That is, if the three vertices are L = (x_L, y_L), M= (x_M, y_M), and N= (x_N, y_N), then the centroid (denoted C here but most commonly denoted G in triangle geometry) is C = \tfrac13(L+M+N) = \bigl( \tfrac13 (x_L+x_M+x_N), \tfrac13 (y_L+y_M+y_N) \bigr). The centroid is therefore at \tfrac13:\tfrac13:\tfrac13 in barycentric coordinates. In trilinear coordinates the centroid can be expressed in any of these equivalent ways in terms of the side lengths a, b, c and vertex angles \begin{align} C &= \frac{1}{a}:\frac{1}{b}:\frac{1}{c} &= \cos L + \cos M \cdot \cos N : \cos M + \cos N \cdot \cos L : \cos N + \cos L \cdot \cos M. \end{align} The centroid is also the physical center of mass if the triangle is made from a uniform sheet of material; or if all the mass is concentrated at the three vertices, and evenly divided among them. On the other hand, if the mass is distributed along the triangle's perimeter, with uniform linear density, then the center of mass lies at the Spieker center (the incenter of the medial triangle), which does not (in general) coincide with the geometric centroid of the full triangle. The area of the triangle is \tfrac32 times the length of any side times the perpendicular distance from the side to the centroid. A triangle's centroid lies on its Euler line between its orthocenter H and its circumcenter O, exactly twice as close to the latter as to the former: \overline{CH}=2\overline{CO}. In addition, for the incenter I and nine-point center N, we have \begin{align} \overline{CH} &=4\overline{CN}, \\[5pt] \overline{CO} &=2\overline{CN}, \\[5pt] \overline{IC} & If G is the centroid of the triangle ABC, then (\text{Area of }\triangle ABG) = (\text{Area of }\triangle ACG) = (\text{Area of }\triangle BCG) = \tfrac13(\text{Area of }\triangle ABC). The isogonal conjugate of a triangle's centroid is its symmedian point. Any of the three medians through the centroid divides the triangle's area in half. This is not true for other lines through the centroid; the greatest departure from the equal-area division occurs when a line through the centroid is parallel to a side of the triangle, creating a smaller triangle and a trapezoid; in this case the trapezoid's area is \tfrac59 that of the original triangle. Let P be any point in the plane of a triangle with vertices A, B, C and centroid G. Then the sum of the squared distances of P from the three vertices exceeds the sum of the squared distances of the centroid G from the vertices by three times the squared distance between P and PA^2 + PB^2 + PC^2 = GA^2 + GB^2 + GC^2 + 3PG^2. The sum of the squares of the triangle's sides equals three times the sum of the squared distances of the centroid from the vertices: AB^2 + BC^2 + CA^2 = 3(GA^2 + GB^2 + GC^2). A triangle's centroid is the point that maximizes the product of the directed distances of a point from the triangle's sidelines. Let ABC be a triangle, let G be its centroid, and let D, E, F be the midpoints of segments BC, CA, AB, respectively. For any point P in the plane of ABC, PA + PB + PC \le 2(PD + PE + PF) + 3PG. C_{\mathrm x} = \frac{1}{6A}\sum_{i=0}^{n-1}(x_i+x_{i+1})(x_i\ y_{i+1} - x_{i+1}\ y_i), and C_{\mathrm y} = \frac{1}{6A}\sum_{i=0}^{n-1}(y_i+y_{i+1})(x_i\ y_{i+1} - x_{i+1}\ y_i), and where A is the polygon's signed area, as described by the shoelace formula: A = \frac{1}{2}\sum_{i=0}^{n-1} (x_i\ y_{i+1} - x_{i+1}\ y_i). In these formulae, the vertices are assumed to be numbered in order of their occurrence along the polygon's perimeter; furthermore, the vertex (x_n, y_n) is assumed to be the same as (x_0, y_0), meaning i+1 on the last case must loop around to i=0. (If the points are numbered in clockwise order, the area A, computed as above, will be negative; however, the centroid coordinates will be correct even in this case.) The centroid of a non-triangular polygon is not the same as its vertex centroid, considering only its vertex set (as the centroid of a finite set of points; ).

Of a tetrahedron and -dimensional simplex

A tetrahedron is an object in three-dimensional space having four triangles as its faces. A line segment joining a vertex of a tetrahedron with the centroid of the opposite face is called a median, and a line segment joining the midpoints of two opposite edges is called a bimedian. Hence there are four medians and three bimedians. These seven line segments all meet at the centroid of the tetrahedron. The medians are divided by the centroid in the ratio 3:1. The centroid of a tetrahedron is the midpoint between its Monge point and circumcenter (center of the circumscribed sphere). These three points define the Euler line of the tetrahedron that is analogous to the Euler line of a triangle. These results generalize to any n -dimensional simplex in the following way. If the set of vertices of a simplex is {v_0,\ldots,v_n}, then considering the vertices as vectors, the centroid is C = \frac{1}{n+1}\sum_{i=0}^n v_i. The geometric centroid coincides with the center of mass if the mass is uniformly distributed over the whole simplex, or concentrated at the vertices as n+1 equal masses. More about triangles and Centroids

Text derived from https://en.wikipedia.org/w/index.php?oldid=1373604735 under CC BY-SA 4.0; modifications have been made.

Sources cited in this revision

4 named source(s) extracted from the cited revision. A source with no author is shown by its publication; nothing is invented.